This DMX decoder allows for 24 Channels of LED lights to be controlled via a DMX control signal. With two DC power inputs, one for channels 1-12 and the other for 13-24, this LED decoder can control 12 channels of LED lights of similar or variating voltage inputs. This decoder accepts either XLR-3 type connections or bare wire connections for the DMX signal input and output. There are a total of eight, 3 channel, common anode outputs with screw-down terminal blocks for easy connection to your LED lights. This decoder is able to accept 5-24VDC at 3A per channel (twenty four channels total) for max load of 360W/5V, 864W/12V, or 1728W/24V. You can set the starting address of the DMX decoder via DIP switches located on the back of the unit. Please note that each DMX decoder requires 24 addresses in the DMX universe being used as well as a 5-24VDC driver large enough to power the lighting load. A built in LED light test mode is available with this DMX decoder. Systems with more than two DMX decoders being used require an XLR3 DMX terminator cable on the last DMX decoder in the series.
|Click For Product Data Sheet|
|Click For Installation Guide|
|Click For Dip Switch Settings|
|Click For Demonstration Video|
|Model||24 Channel DMX512 Decoder|
|Dimensions||10.24"L x 4.72"W x 1.57"H|
|DMX Type||DMX 512|
|DC Power||5VDC, 12VDC, 24VDC 3A per Channel Max|
|Watts||5VDC - 360W Max|
12VDC - 864W Max
24VDC - 1728W Max
|Warranty Period||1 Year|
STICK 4 WiFi DMX Control Panel with Software and 6VDC Power Supply - 1024 Channel
SKU: LC-NL-STICK4 View Product Page
Introducing the STICK 4 DMX WiFi Controller, the genius of the STICK family of lighting controls, prog. The first DMX controller that can be programmed and operated using built in WiFi connection, no need to run an Ethernet cable to your router for wireless capabilities. Control up to 1024 channels of RGBW, RGB and Single Color LED Lighting. Using the ESA2 or ESA PRO PC software you can create and save up to 36 custom lighting scenes over 1 zone and call them up using the 6 touch sensitive buttons on the face of the unit or by using the 8 dry contact ports for automated scene triggering. There are a total of 12 touch sensitive buttons plus color wheel control on the face of the unit that are designed to adjust, scene selection, color, saturation, speed, and brightness. When saving to stand alone (away from the computer) storage space allows for 2,729 scene steps using 20 DMX channels or 124 steps using 512 DMX channels. If connected to a WiFi network this controller can be paired to a number of free smartphone applications for scene triggering and customizable control directly from a mobile phone or tablet. Each CE and RoHS approved controller includes free computer software download, USB cable, and stand alone power supply.
Wireless DMX Transmitter and Receiver
SKU: LC-HK-DMX-WI View Product Page
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
DMX Signal Cable, XLR3 Male to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL6 View Product Page
This is a DMX signal Cable with a XLR3 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller or device that has XLR3 output plugs to our PX24501 or 24 Channel DMX Drivers, or to daisy chain any other DMX LED Drivers with XLR3 connectors.
Signal Terminator for DMX Driver XLR3 Type
SKU: LA-EL-DMX-TM2 View Product Page
This is a DMX signal terminator for DMX Decoder / Drivers that use an XLR3 type connection for DMX Signal to LED Lights. This terminator will allow you to terminate the DMX signal in the last DMX driver of your system. For use with DMX systems using more than two XLR3 DMX drivers.
Signal Terminator for DMX Driver RJ45 Type
SKU: LA-EL-DMX-TM View Product Page
This is a DMX signal Terminator for use with LED DMX Drivers that use an RJ45 jack. Use the signal terminator on the DMX output of the last DMX Driver in daisy chain. This terminator is needed if you have more than 3 DMX Drivers in a series of daisy chained drivers.
Note: * Indicates a required field
- There are currently no reviews for this product