SKU: LC-OL-DMX-PX02
The PX408 4 channel DMX decoder allows you to control 32 amps over four channels of LED Lighting to DMX512 1990 or RDM 2009 Lighting controllers. Use this for any 12-24VDC common anode RGBW lights, RGB LED lights plus one single color LED light, or four single color LED lights, LED modules, or LED light strips to a DMX or RDM 2009 Control System. 8A per channel with a maximum power of 384W / 12VDC or 768W / 24VDC. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables or by using the green phoenix terminals for your 3 wire dmx signal. Unit has DIP switches on the side to manually set the starting DMX address of each driver. On power lights will be white until a DMX signal is received, test function will cycle colors when all dip switches are in the on position. Supported RDM parameters: DISC_UNIQUE_BRANCH / DISC_MUTE / DISC_UN_MUTE / DEVICE_INFO / SOFTWARE_VERSION_LABEL / DMX512/ RDM_START_ADDRESS / IDENTIFY_DEVICE / MANUFACTURER_LABEL / SUPPORTED_PARAMETERS. LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.
SPECIFICATIONS | |
Model | PX408 4 Channel DMX LED Driver |
SKU | LC-OL-DMX-PX02 |
Dimensions | 5.51" x 1.97" x 1.02"H |
DMX Type | DMX512 1990/RDM 2009 |
RDM Control | Yes |
DC Power | 12-24VDC, 8A x 4CH |
Watts | 12VDC: 384W 24VDC: 768W |
Operating Temp | -4 ~ 122°F |
Rating | Dry |
Warranty Period | 1 Year |
Test Function | Yes See Mode |
STICK 4 WiFi DMX Control Panel with Software and 6VDC Power Supply - 1024 Channel
SKU: LC-NL-STICK4 View Product Page
Introducing the STICK 4 DMX WiFi Controller, the genius of the STICK family of lighting controls, prog. The first DMX controller that can be programmed and operated using built in WiFi connection, no need to run an Ethernet cable to your router for wireless capabilities. Control up to 1024 channels of RGBW, RGB and Single Color LED Lighting. Using the ESA2 or ESA PRO PC software you can create and save up to 36 custom lighting scenes over 1 zone and call them up using the 6 touch sensitive buttons on the face of the unit or by using the 8 dry contact ports for automated scene triggering. There are a total of 12 touch sensitive buttons plus color wheel control on the face of the unit that are designed to adjust, scene selection, color, saturation, speed, and brightness. When saving to stand alone (away from the computer) storage space allows for 2,729 scene steps using 20 DMX channels or 124 steps using 512 DMX channels. If connected to a WiFi network this controller can be paired to a number of free smartphone applications for scene triggering and customizable control directly from a mobile phone or tablet. Each CE and RoHS approved controller includes free computer software download, USB cable, and stand alone power supply.
DMX Signal Cable, XLR3 Male to RJ45 - 36"
SKU: LA-EL-DMX-CBL View Product Page
This is a 3 foot long DMX signal Cable for any DMX application requiring XLR3 DMX output to an RJ45 DMX input. This cable will allow you to connect to a DMX controller, that has XLR3 output plugs, and any DMX Driver or controller with RJ45 connector. 36" cable included, XLR3 Male, plug on one end and RJ45 jack on the other end.
Signal Terminator for DMX Driver RJ45 Type
SKU: LA-EL-DMX-TM View Product Page
This is a DMX signal Terminator for use with LED DMX Drivers that use an RJ45 jack. Use the signal terminator on the DMX output of the last DMX Driver in daisy chain. This terminator is needed if you have more than 3 DMX Drivers in a series of daisy chained drivers.
Wireless DMX Transmitter and Receiver
SKU: LC-HK-DMX-WI View Product Page
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
Note: * Indicates a required field
- There are currently no reviews for this product