HR Line Channel and Warm White Strip Lights set into Concrete Entryway

Ribbon Star Max, Water-resistant Warm White LED Strip Light - UL 12VDC - 118" (3m)

SKU: RL-SC-RSM-P-WW-3M     View Product Page
The UL Listed Ribbon Star Max Warm White PU Water-Resistant LED Strip Light is an ideal light strip for use in our outdoor inground aluminum channels (SKU: EX-KLG-1) . The water-resistant LED Strip Light is fully encased in a crystal clear PU polyurethane coating for an IP64 rating, non submersible non UV proof. Each 118" (3 meters) strip can be cut every 0.98" and comes with 3M™ VHB™ mounting tape on the back, for a permanent mounting solution. The density of the SMD, surface mount diode, LED chips provide a smooth and linear lighting solution for our outdoor channels with no visible dots or hot spots. Additional accessories included are 10 clear plastic screw down clips and a pair of male/female waterproof connectors. The strip consists of (3) 3528 Epistar SMD LED chips per one inch and requires 2.92W of Constant Voltage DC power for each foot of strip light. The Max Warm White Strip is 3000-3500K Color Temperature and provides 201 lumens per foot of light output. Can be used for outdoor lighting in our outdoor aluminum channels, decks, patios, walkways, path lighting, and many more applications. The PU water resistant strip lights are not intended to be submersed, exposed to standing water or direct UV contact. This product is UL listed for class 2 low voltage luminaries and fixtures, RoHS and CE approved.

Mean Well Waterproof LED Power Supply 480W - 12VDC

SKU: PS-MW-480-W-12     View Product Page
This product is a waterproof IP65 rated Mean Well brand 480W, 12VDC LED transformer designed to convert 100-240VAC or 277VAC power to 12VDC. With a 40A maximum output this transformer can drive up to 480 watts of 12VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 20 amps of current. Each Mean Well HLG-600H-12A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.