SKU: LN-DX-NE-WWH-FH-5
Our thin and flat topped side emitting LED neon warm white flex strips have an 8mm strip inside to create a smooth, shadow free 3000K linear lighting from a smaller profile. These strips are easy to conceal and not overly bright to blind someone staring directly at them. They are perfect for making signs, designs on walls, embedding into surfaces, architecture, landscaping, or any indoor or outdoor application. The IP67 silicone housing creates a dust and water tight seal, while diffusing the LEDs below for no visible dots or hot spots. Use any of the glue and solder free quick connect options to make easy splices and connections throughout the flex strip. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Each 5 meter roll (16.4ft) includes one solder assembly wire lead, one end cap, 10 mounting clips and 10 self tapping screws. The neon flex requires 24VDC input and a minimum of 3.51 watts per linear foot of lighting to power. An entire 16.4ft roll would need at least 58W to operate. Each strip is safety tested with ETL listed, RoHS and CE marks.
Click For Product Data Sheet |
Click For Installation Guide |
Calculate Electrical Load | |
* Power Supply capacity must be larger than minimum lighting load. |
SPECIFICATIONS | |
Model | Flat Neon Side Emitting, Waterproof Warm White |
SKU | LN-DX-NE-WWH-FH-5 |
Dimensions | 197" x 0.31" x 0.47"H |
Connection Type | 2 Wire (+/-) |
LED Chip Type | 2835 |
LED Quantity | 6 SMDs per 1.97 inches |
LEDs Per Strip | 600 SMD LEDs |
Input Power | 24VDC Constant Voltage |
Watts | 3.51W per foot |
Beam Angle | 110° |
Lumens | 117 lm/ft |
CRI | >80 |
Kelvin | 3,000K |
Rating | IP67 Waterproof |
Ambient Temp | -4°~113°F |
Max Serial Connection | 30 Feet |
Certification | ETL, RoHS, CE |
Warranty Period | 2 Years |
For B2B or Large Quantity Price Info Click Here
Silicone End Cap for Side Emitting 8x12mm LED Neon
SKU: LN-DX-LR-FH-EC View Product Page
A silicone end cap for sealing non wired ends of our 8x12mm Single Color Side Emitting Neon Flex Strips. This end cap is intended only for the flat topped side emitting version of the flex strip. Silicone Adhesive is required to maintain IP67 waterproof level. All accessories can be found in products listed below.
Silicone End Cap with Hole and Wire Lead for Side Emitting 8x12mm LED Neon
SKU: LN-DX-LR-FH-ECH View Product Page
A 12" long 22AWG 2 wire solder lead with white PVC jacket and one holed end cap for re connection of 8x12mm side emitting White and Warm White Neon Flex Strips. The wire lead must be soldered when cutting and re-connecting our single channel side emitting round neon flex strips. Silicone Adhesive is required to maintain IP67 waterproof level. Wires are cut shorter and pre-tinned on the end intended for soldering. All additional accessories are listed found below.
(10) Mounting Clips for Mini Neon Side Emmiting LED Strip Lights
SKU: LN-SC-NEOS-CLIPS-10 View Product Page
This is a pack of 10 mounting clips for our mini neon side emitting strip lights. Each clip has a screw hole with counter sink for mounting to walls, ceilings, stone or concrete. The side emitting strip bends on a horizontal access so mounting tape does not create as tight of a hold as the mounting clips. Sold in packs of 10, for creation of bends, curves, lettering and designs with a bend radius no more than 3.93" to avoid damage to the strip light.
Aluminum Mounting Track for 8mm Side Emitting Flat Top LED Neon
SKU: LN-DX-NEA-AP-15 View Product Page
This product is a 1 meter long (3.28ft) aluminum track for mounting our flat top single color LED neon flex. This product is intended only for our 8mm white and warm white side emitting neon flex strips listed below. Each 3.28 foot of mounting track includes two 1" long self tapping screws. The track is designed with extra space for screw heads so there is no need to counter sink. Easily install the track by screw mount and then pushing the LED neon flex strip into place. This track enables smooth and straight linear lighting, with no sags, annoying light dots or hot spots. Please note that factory wire leads, end caps, and connectors do not fit inside the track.
2 Wire Solderless Lead Assembly for Flat Side Emitting Single Color Neon Flex
SKU: LN-DX-NEA-FH-CON View Product Page
A 11" long 22AWG 2 wire solder-less lead connector with white PVC jacket and plastic end cap for solder and glue free re-connection of flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and reconnect the flat top 8mm neon flex strips. An outer metal jacket pinches the strip and connector, which is then sealed inside of a plastic casing with silicon wire grommet. Each connector includes one 11" side emitting neon cable connector (22AWG), 1 waterproof silicon tape pad, internal install clip, and 1 external install clip.
2 Wire Solderless Lead Butt Connector Assembly for Flat Side Emitting Single Color Neon Flex
SKU: LN-DX-NEA-FH-MCON View Product Page
A seamless butt splice wire connector for our flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and reconnect two pieces of our flat top 8mm neon flex strips while providing fresh 24V power from the butt joint. There is no need for soldering or gluing. This connector allows you to create unlimited lighting lengths with no voltage drop by providing fresh power at the max serial lengths. Two outer metal jackets pinch the strip and connector to create a seamless connection between two pieces of neon flex. Each assembly includes 2 internal install clips, 1 external install clip, 1 silicone tape pad and lead wire conductor.
Solderless Butt Connector Assembly for Flat Side Emitting Single Color Neon Flex
SKU: LN-DX-NEA-FH-SEM View Product Page
A seamless butt connector for our flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and reconnect two pieces of our flat top 8mm neon flex strips without any need for soldering or gluing. Two outer metal jackets pinch the strip and connector to create a seamless connection between two pieces of neon flex. Each assembly includes 2 internal install clips, 1 silicone tape pad and 1 external install clip.
Glueless End Cap Assembly for Flat Side Emitting Single Color Neon Flex
SKU: LN-DX-NEA-FH-END View Product Page
A glue free end cap for our flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and cap the flat top 8mm neon flex strips without any need for silicon glue or sealant. An outer metal jacket pinches the strip and connector, which is then sealed inside of a plastic casing with silicon wire grommet. Each assembly includes 1 waterproof silicon tape pad, internal install clip, and 1 external install cap.
Note: * Indicates a required field
- There are currently no reviews for this product