Glueless End Cap Assembly for Flat Side Emitting Single Color Neon Flex

Warm White LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

SKU: LN-DX-NE-WWH-FH-5     View Product Page
Our thin and flat topped side emitting LED neon warm white flex strips have an 8mm strip inside to create a smooth, shadow free 3000K linear lighting from a smaller profile. These strips are easy to conceal and not overly bright to blind someone staring directly at them. They are perfect for making signs, designs on walls, embedding into surfaces, architecture, landscaping, or any indoor or outdoor application. The IP67 silicone housing creates a dust and water tight seal, while diffusing the LEDs below for no visible dots or hot spots. Use any of the glue and solder free quick connect options to make easy splices and connections throughout the flex strip. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Each 5 meter roll (16.4ft) includes one solder assembly wire lead, one end cap, 10 mounting clips and 10 self tapping screws. The neon flex requires 24VDC input and a minimum of 3.51 watts per linear foot of lighting to power. An entire 16.4ft roll would need at least 58W to operate. Each strip is safety tested with ETL listed, RoHS and CE marks.

White LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

SKU: LN-DX-NE-WH-FH-5     View Product Page
Our thin and flat topped side emitting LED neon white flex rolls have an 8mm strip inside to create a smooth, shadow free 6000K linear lighting from a smaller profile. These strips are easy to conceal and not overly bright to blind someone staring directly at them. They are perfect for making signs, designs on walls, embedding into surfaces, architecture, landscaping, or any indoor or outdoor application. The IP67 silicone housing creates a dust and water tight seal, while diffusing the LEDs below for no visible dots or hot spots. Use any of the glue and solder free quick connect options to make easy splices and connections throughout the flex strip. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Each 5 meter roll (16.4ft) includes one solder assembly wire lead, one end cap, 10 mounting clips and 10 self tapping screws. The neon flex requires 24VDC input and a minimum of 3.51 watts per linear foot of lighting to power. An entire 16.4ft roll would need at least 58W to operate. Each strip is safety tested with ETL listed, RoHS and CE marks.

2 Wire Solderless Lead Assembly for Flat Side Emitting Single Color Neon Flex

SKU: LN-DX-NEA-FH-CON     View Product Page
A 11" long 22AWG 2 wire solder-less lead connector with white PVC jacket and plastic end cap for solder and glue free re-connection of flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and reconnect the flat top 8mm neon flex strips. An outer metal jacket pinches the strip and connector, which is then sealed inside of a plastic casing with silicon wire grommet. Each connector includes one 11" side emitting neon cable connector (22AWG), 1 waterproof silicon tape pad, internal install clip, and 1 external install clip.

2 Wire Solderless Lead Butt Connector Assembly for Flat Side Emitting Single Color Neon Flex

SKU: LN-DX-NEA-FH-MCON     View Product Page
A seamless butt splice wire connector for our flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and reconnect two pieces of our flat top 8mm neon flex strips while providing fresh 24V power from the butt joint. There is no need for soldering or gluing. This connector allows you to create unlimited lighting lengths with no voltage drop by providing fresh power at the max serial lengths. Two outer metal jackets pinch the strip and connector to create a seamless connection between two pieces of neon flex. Each assembly includes 2 internal install clips, 1 external install clip, 1 silicone tape pad and lead wire conductor.

Solderless Butt Connector Assembly for Flat Side Emitting Single Color Neon Flex

SKU: LN-DX-NEA-FH-SEM     View Product Page
A seamless butt connector for our flat topped White and Warm White Side Emitting Neon Flex Strips. This assembly comes with parts required to cut and reconnect two pieces of our flat top 8mm neon flex strips without any need for soldering or gluing. Two outer metal jackets pinch the strip and connector to create a seamless connection between two pieces of neon flex. Each assembly includes 2 internal install clips, 1 silicone tape pad and 1 external install clip.