Our client Gary used thirty custom cut 1 Meter Aluminum Extrusions with Frosted Diffuser - Outdoor Inground to light up this backyard pathway at his customer's immaculate home in Carmel, California. Inside of the aluminum channels he used our 12VDC Ribbon Star Max Waterproof White LED Strip Lights. With its high density of LEDs the max strip was perfect for diffused illumination of the channel's frosted cover with no visible hot spots. One 12VDC 320W Mean Well Transformer provides power for the entire run of strip lights. Gary did a great job installing the lights and channels and his customer couldn't be happier.
HR-LINE Aluminum Extrusion - Outdoor Inground
SKU: EX-KLG-1 View Product Page
$51.99
$117.99
$196.99
10m Reel - 32.8ft Long Run Waterproof Tape Light, IP67, CRI > 90, 140 LEDs/m - ETL 24VDC
SKU: RL-DX-LR140-T View Product Page
The IP67 LR140, 10m waterproof tape light is the highest density and lumen output of our Ribbon Star Long Run series tape lights. It is encapsulated in an IP67 silicone housing with 42 LEDs/ft (140 LEDs/m). A constant current driving IC design makes this strip able to be powered from one end with even brightness, which means no more splicing smaller strip lights together. The 2835 LED chip has low heat, high lumens and a long lifespan. The sleek waterproof housing is narrow enough to fit into almost any of our aluminum extrusion for 32ft long line of light effects for architectural or landscape designs. With a CRI greater than 90 spec colors, photos, and displays become more vibrant and true. This strip requires only 3.66W of 24VDC power per foot and has high lumen output up to 480 lm/ft. Each roll can be dimmed using low voltage PWM dimmer or dimmable power supply and can be cut and re-connected every 1.97" (5cm). This strip must be soldered and waterproofed to cut and connect. Each strip light roll includes one end cap, one wire lead with holed cap, 20 mounting straps and 40 mounting screws.
15m Reel - 49.2ft Long Run Waterproof Strip Light, IP67, CRI 90, 70 LEDs/m - ETL 24VDC
SKU: RL-DX-LR70-T View Product Page
Wiring long outdoor linear lighting runs just got a lot simpler with our 50 foot roll of waterproof LED strip light. A high quality 15 meter strip light roll with 70 LEDs per meter is encapsulated in an IP67 silicone housing for use in wet, damp and dusty locations. A constant current IC driving system allows it to be powered from one end with even lighting throughout the entire 49.2 foot strip. There are seven surface mounted 2835 chips every cuttable section of 3.94" (10cm). This newer style chip creates less heat, is brighter and longer lasting than its 3528 style predecessor. A CRI 90 spec makes the light output crisp and clean, defining colors and architectural features more vividly. A low power output of only 1.83 watts per foot and standard lumen output up to 239 lumens per foot make this strip extremely efficient and bright enough for most lighting application. This light strip requires 24VDC power input, can be dimmed using low voltage PWM dimmer or dimmable power supply. Each strip light roll includes one end cap, one wire lead with holed cap, 20 mounting straps and 40 mounting screws.