The GIZA profile from KLUS has a slim design intended for our double wide or high density LED strip lights. This channel can be mounted into ceilings and drywall, and has numerous mounting options for any lighting application. Using the frosted cover and two rows of high density LEDs one can get a single beam of light output with little to no hot spots. The base width of this channel can fit up to two rows of 10mm wide LED strips. You can use mounting springs and a small hole to adhere the channel to virtually any surface or use the drywall mounting bracket with plastic clips to recess into the drywall.
|Model||GIZA Aluminum Extrusion|
|Dimensions||39.37"L x 1.02"W x 0.39"H|
|Mounting||Screws, VHB Tape, Mounting Clips, Mounting Springs, Drywall Mount|
|Available Lengths||1M, 2M, 3M|
For B2B or Large Quantity Price Info Click Here
(6) Plastic Mounting Clips for Drywall Extrusion
SKU: EX-KL-CLIP-21-6 View Product Page
This is a set of 6 plastic mounting clips for securely adhering 1M of LED extrusion to a flush mount dry wall aluminum housing. Simply slide the plastic mounting clips into the bottom of the extrusion, 6 needed to securely fasten 1M of extrusion, and then click the extrusion into the aluminum flush mount for 0.5" drywall. See installation instructions and compatible extrusion by clicking the links below.
Plastic End Cap for GIZA 1" x 0.4" Extrusion
SKU: EX-KL3-CAP-2 View Product Page
These are our plastic end caps designed for our GIZA style 1" Wide x 0.4" deep rectangle shaped LED Aluminum Extrusions to give your extrusion a clean and finished look. The flat plastic cap will fit both the clear and frosted flat HS22 diffuser styles. The curved cap is meant to be used with the GIZA extrusion, and curved G-L cover, while the square cap is meant to be used with the GIZA extrusion and square G-K covers. These products are sold individually and in single units. With proper sealing techniques using a non conductive frost resistant silicone, these caps and channels can meet an IP67 waterproof rating for use in outdoor environments.
(2) Extrusion Plastic Mounting Clips for KL3 1" Wide Profiles
SKU: EX-KL3-CLIP-1-2 View Product Page
A set of 2 clips for mounting our 1" wide LED Aluminum Channels. Use the two mounting clips to secure the aluminum channels to any drillable surface. Comes with 2 clips for a secure mounting solution that is simple to install. See a list of compatible extrusions that can be used with these mounting clips below. A minimum of two clips per 1M channel are recommended for a secure installation.
(2) Adjustable Mounting Clip for Most KL3 1" Wide Profiles
SKU: EX-KL3-CLIP-2-2 View Product Page
A set of 2 angle adjustable KLUS brand REGIP mounting brackets compatible with most of our 1" wide Aluminum Channels. Use the two mounting clips to secure the aluminum channels to any drillable surface. The adjustable plastic clips make it so the user can adjust the beam angle of the custom LED lighting fixture. A removable plastic cover allows for quick installation using screws which are then covered to create a clean and finished look. This product is sold in pairs of 2 mounting clips, 2 clips minimum are recommended per 1M of aluminum channel.
(2) GP Surface Mounting Spring for, PDS ZM, TRIADA and 1" Extrusions
SKU: EX-KL-CLIP-18-2 View Product Page
This is a set of 2 spring loaded mounting clips for surface mounting our PDS ZM, Triada, and 1" wide extrusions to drywall, wood, granite, brick, or any other solid surface. Works with any 1" wide extrusion without wings. To use, simply drill a 5/16" - 3/8" wide hole into a surface at least 3/8" thick and push the spring through. Comes with 2 clips, one for each end of the profile. For a more secure mount multiple mounting springs may be necessary.
90 Degree Connector for Anodized Drywall Extrusions
SKU: EX-KL3-CON-90 View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.
180 Degree Connector for Anodized Drywall Extrusions
SKU: EX-KL3-CON-180 View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.
TEKNIK / TEKUS Aluminum Channel for Drywall Mounting
SKU: EX-KL3-DM View Product Page
Note: * Indicates a required field
- There are currently no reviews for this product