Header Logo

GLAD-45 Anodized Aluminum Extrusion Triangle Shape - .5" Deep NEW!

SKU: EX-KL1-9

Product Description

The GLAD 45 extrusion is mainly designed for interior lighting such as cabinets, cupboards, stairs, and windows; but can also be used with outdoor covers and and weatherproof silicon adhesive to create IP67 rated outdoor fixtures. The triangle shape of the extrusion changes the light output to 45°, which keeps the light from shining into your eyes. When sealed this extrusion and cover combo can be used to light external architectural elements like the sides of buildings, landscaping, and gardens. Small grooves in the back allow for installation using mounting springs and can also accommodate our ZM connectors to keep your butt and miter joints tight. The extrusion is made of high-quality aluminum and acts as a great heat sink for any strip light with max width of 10.8 mm (0.42"). A line of light effect can be created using the liger cover and an LED strip with at least 3 LEDs every 1".

Product Downloads
Click For Installation Video
Click for Cover Instruction
mounting instruction
Product Specifications
SPECIFICATIONS
ModelGLAD-45 Aluminum Extrusion
SKUEX-KL1-9
Dimensions39.37"L x 0.75"W x 0.75"H
Base Width0.42"
MaterialAluminum
CoverPolycarbonate
MountingMounting Springs, VHB Tape, Screws
Available Lengths1M, 2M
Available FinishesAnodized
Choose Size:
Showing 1 Meter Lengths Show 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Anodized
1M Anodized
SKU: EX-KL1-9A-1M

$19.99

Choose Cover Type:
Indoor
Outdoor
$19.99
Show 1 Meter Lengths Showing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Anodized
2M Anodized
SKU: EX-KL1-9A-2M

$45.99

Choose Cover Type:
Indoor
Outdoor
$45.99

Plastic End Cap for GLAD-45 Triangle Extrusion

SKU: EX-KL1-CAP-9     View Product Page
Use this plastic end cap with our GLAD-45 triangle shaped extrusion to give your profile a clean and finished look. The light grey plastic meshes well with the silver anodized finish of the GLAD-45 profile to create custom lighting fixtures in corners, walls, drop ceilings, cabinets, and outdoor spaces. This product is sold individually and in single units. With proper extrusion sealing techniques and use of outdoor HS cover this cap can be exposed to outdoor elements.

Plastic End Cap for GLAD-45 Triangle Extrusion

(2) GP Surface Mounting Spring for, PDS ZM, TRIADA and 1" Extrusions

SKU: EX-KL-CLIP-18-2     View Product Page
This is a set of 2 spring loaded mounting clips for surface mounting our PDS ZM, Triada, and 1" wide extrusions to drywall, wood, granite, brick, or any other solid surface. Works with any 1" wide extrusion without wings. To use, simply drill a 5/16" - 3/8" wide hole into a surface at least 3/8" thick and push the spring through. Comes with 2 clips, one for each end of the profile. For a more secure mount multiple mounting springs may be necessary.

(2) GP Surface Mounting Spring for, PDS ZM, TRIADA and 1" Extrusions

90 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-90     View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

90 Degree Connector for Anodized Drywall Extrusions

180 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-180     View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

180 Degree Connector for Anodized Drywall Extrusions
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information
Top