The STEKO aluminum extrusion from KLUS designs is made especially for step and staircase lighting using thin profiled LED side light strips. This aluminum profile is a smaller more economical version of the STEP extrusion and has a small channel that is covered with a transparent silicon string for emitting light. The extrusion can be mounted by drilling and counter sinking screws directly into the step surface. Using our side light strip or thin lux strip that is less than 6mm wide you can create beautiful and customized step lighting that also acts as additional safety for hard to see steps and stairs. Face the lights upwards towards the silicon cover for a more intense light with visible dots or face the light downwards into the channel for more even softer lighting with no dots. A small channel is provided at the bottom of the extrusion intended for running and concealing wires. If this channel is going to be used outdoors the LED strip should be sealed using a non conductive, frost resistant neutral silicon. This profile is available in 1M and 2M lengths.
|Dimensions||39.37"L x 1.70"W x 0.89"H|
|Available Lengths||1M, 2M|
For B2B or Large Quantity Price Info Click Here
(2) Plastic End Caps for STEKO Step Extrusion Left and Right
SKU: EX-KLS-CAP-2 View Product Page
This product is a pair of left and right plastic end caps for our LED Aluminum Extrusion for step lighting. Add an end cap to give your extrusion a clean and finished look. This cap will fit both ends of your step extrusion, simply push into place. This product is sold in pairs to cap the left and right ends of your extrusion.