George Hauk's Automotive in Alexandria, LA called us inquiring about lighting costs to retrofit their existing outdoor channel letters. They told us that there local sign company was going to charge them $7,000 to change out the old lights and still would not be able to guarantee they would be brighter than the old lighting, they also mentioned they may have to switch out the acrylic faces of the signs for another $6,000. George then called our sales team and we quoted him the cost of our lighting products, and explained the process of installation and wiring. They used our ES4 Blue LED Modules and one 600W 12VDC Power Supply to complete the job, spending less than $1,500. Each letter contains roughly 100 4 chip blue modules. By doing the job themselves they saved over $11,000 from using the sign company and have a bright, vivid, eco friendly, low power, and long lasting channel letter lighting for years to come.
ES4 LED Backlight Module 4 Chip - Blue
SKU: MD-BW-ES4-B View Product Page
This 4 chip 12VDC blue LED backlight module is a great low cost and reliable LED module for signs, channel letters, halo lighting, accent lighting, or for circular and curved layouts. A total of four 5050 SMD chips provide ample lighting with a max power requirement of 0.96W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for accent lighting, cove lighting, under-cabinet,above cabinet and general colored accent lighitng. A constant voltage 12 Volt DC power source is needed to power this product. The plastic ABS shell and clear epoxy coating provides limited water-resistance to moisture and an IP65 rating. This module is non submersible and non UV proof.
Mean Well LED Power Supply CV 600W - 12VDC
SKU: PS-MW-600-12 View Product Page
This Mean Well 600W, 12VDC LED Power Supply / Transformer, has a 100 - 240AC input and 12VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Lights, LED Light Ribbons, RGB LED lighting and any other 12VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 540 watts of 12VDC LED lights. Only install face up with sufficient breathing space.
Note: * Indicates a required field
- There are currently no reviews for this product