Color changing RGB LED Strip Lighting is used for man cave accent lighting. A zone controller is being used to control two different sections of the lighting. The different zones gives the user the ability to change two areas of the lighting separately as well as control them at the same time. Power is being driven by a 12VDC Mean Well Power Supply. We prepared a basic wiring diagram for the customer to make the install simple and care free. He was ecstatic to see the new vibe of his man cave lighting and is ready to spend more time there. If you have a similar project feel free to give us a call and we would be happy to assist you.
Ribbon Star RGB 180 LED Strip Light - 60 LEDs per Meter - UL 12/24VDC - IP20 & IP67
SKU: RL-SC-RS-RGB View Product Page
These UL Listed Ribbon Star RGB LED strips have super bright 3 in 1 RGB SMD LEDs on board and can produce 16 million shades of brilliant color. There are 3 LEDs for every 2 inches. This 118" (3m) LED strip can be cut every 2 inches and has many quick connnection options, for easy connection and use. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 43W of constant voltage 12VDC power needed for this 118" strip (4.3W per foot). This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets; Comes with two quick connectors. See link below for demonstration video. UL Listed for class 2 luminaries and fixtures, RoHS and CE approved.
Color Wheel RGB 10 Zone Controller and Receiver Kit, 5-24VDC 6A/CH
SKU: LC-LT-RGBB-KIT View Product Page
This 10 zone syncing RGB LED Controller with Color Wheel remote is a one of a kind RGB LED Controller with memory and zone capabilities. Capable of 18 pre-programmed modes with speed and brightness adjustment as well as color wheel static color control. Sync an unlimited amount of 18 Amp RGB LED Receivers to up to 10 different zones within the 150ft RF Control Signal radius (line of sight) to create amazing syncing color effects in multiple locations. Easily control each zone individually, in groups, or all zones as one through the remote keypad. The color wheel remote is powered through a built in 5V lithium battery and charged using an included USB to mini USB cord. One kit includes one memory Color Wheel Remote and one Receiver. Any additional receivers can be sold separately. Watch the product video to see some of the functionality of the color wheel choices, modes, and zone control.
Mean Well LED Power Supply Three Output 200W - 12VDC
SKU: PS-MW-200-12 View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
(10) 2 Wire Solderless Snap Down Connectors, 18-24AWG
SKU: LA-LU-WC-2WB-10 View Product Page
Our solderless two pole snap down connectors are designed to easily connect two pairs of 18-24AWG stranded wire together without soldering or wire stripping. Each end of the connector has built in conductive metal blades to perforate and secure your 18-24AWG stranded wire, so no wire strippers are required. Simply insert your wires through the intended wire holes and press down with a pair of pliers. Unlike standard crimping style butt connectors, these connectors can easily be re-used multiple times over. Each connector is rated for a max voltage of 300V AC/DC not to exceed 10 amps. These connectors are sold in sets of 10 and can be used with our T and snap connectors for various wiring circuits.
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
