Each 5 meter roll of commercial grade mini neon LED strip light has a dependable IP67 waterproof rated UV resistant PVC housing to create vibrant dot free illumination for a line of light effect. The milky coating and design of this special strip light delivers 100% light diffusion with no hot spots, similar to the look of a neon tube. This strip is designed to bend on a vertical access and can be used to wrap perimeters, down light, up light or any application requiring the strip to be bent how it is rolled up on the reel. Use our mini neon led indoors and outdoors for a variety of lighting projects both functional and decorative. This strip requires 24 volt DC input and consumes 3.81 watts of power per foot, at full brightness. This product is dimmable by our PWM low voltage dimmers or by our magnitude dimmable power supplies with compatible wall switch. This strip can be cut and re-connected every 1.5" and comes with 1 extra wire lead setup, 1 end cap, and 20 plastic mounting clips.
|Click For Product Data Sheet|
|Click For Installation Guide|
|LED Strip Light Comparison Guide|
|Click For Electrical Load Calculator|
|Model||Mini Neon Top Emitting, Waterproof White|
|Dimensions||197" x 0.52" x 0.40"H|
|Connection Type||2 Wire (+/-)|
|LED Chip Type||3014|
|LED Quantity||7 SMDs per 1.5 inches|
|LEDs Per Strip||910 SMD LEDs|
|Input Power||24VDC Constant Voltage|
|Watts||3.81W per foot|
|Max Serial Connection||16.4 Feet (5m)|
|Certification||ETL, RoHS, CE|
|Warranty Period||2 Years|
For B2B or Large Quantity Price Info Click Here
End Cap for Mini Neon Top Emmiting LED Strip Light
SKU: LN-SC-NEOT-CAP View Product Page
This end cap is designed to be used only with our top emitting mini neon strip lights, SKU: LN-SC-NEOT-W-5 or LN-SC-NEOT-WW-5. After cutting your strip light use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water, dust, and moisture.
Mean Well Waterproof LED Power Supply 150W - 24VDC
SKU: PS-MW-150-W-24 View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.
Waterproof Mini LED Dimmer With RF Remote, 5-24VDC 12A
SKU: LC-LF-27DIM View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100%. Don't let the small size fool you this controller boasts 12A of maximum output power or 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. The 16AWG bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.
2 Conductor Direct Burial Wire - 18AWG
SKU: OA-AX-2C View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.