Our rugged and durable UL Listed Ribbon Star Ultra, White flexible waterproof LED Strip Light is fully enclosed in a commercial grade silicon housing for an IP67 rating, making this LED Strip fully water (non-submersible), dust and UV proof. This 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 3 SMD LEDs per inch and 54 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright and fully weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, and 4 end caps with holes for wiring, and waterproof connectors at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 6000-6500K color temperature, UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
|Click For Product Data Sheet|
|Ultra Waterproof 12V Connection Guide|
|LED Strip Light Comparison Guide|
|Click For Electrical Load Calculator|
|Model||Ribbon Star Ultra, Waterproof White - 118" (3m)|
|Dimensions||118" x 0.52" x 0.28"H|
|Connection Type||2 Wire (+/-)|
|LED Chip Type||3020|
|LED Quantity||3 SMDs per inch|
|LEDs Per Strip||360 SMD LEDs|
|Input Power||12VDC Constant Voltage|
|Watts||5.4W per foot|
|Max Serial Connection||15 Feet|
|Certification||UL Listed, RoHS, CE|
|Warranty Period||2 Years|
|Downloads & Info|
|Click For Product Data Sheet|
|Click for Light Box Diffusion Guide|
|Strip Light Soldering Tutorial|
|Determining the Proper Power Supply Tutorial|
|Installing a PWM Dimmer Tutorial|
For B2B or Large Quantity Price Info Click Here
TPU End Cap for Single Color Waterproof LED Strips
SKU: RA-SC-RS-EC View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECH View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.
(3) Female Waterproof Ribbon to Wire Strip Light Connectors - 10"
SKU: RA-SC-RS-T-RWF-3 View Product Page
Use this 10" female connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof female end.
(3) Male Waterproof Ribbon to Wire Strip Light Connectors - 10"
SKU: RA-SC-RS-T-RWM-3 View Product Page
Use this 10" Male connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof male end.
(3) Male/Female Waterproof Ribbon to Ribbon Strip Light Connectors - 20"
SKU: RA-SC-RS-T-RWR-3 View Product Page
Use this 20" wire connector on our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strips to add 20 inches of lead wire between Waterproof strips. Waterproof Male and Female ends. Sold in sets of 3.
(10) Mounting Clips for Ribbon Star Waterproof Strip Lights
SKU: RA-SC-RS-T-CL-10 View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.