This extravagant special event designed by one of our customers used LED Products throughout to create a one of a kind ambiance that turned an ordinary event into one that was extraordinary. By using our 40" Bright Star 3 in 1 Wall Washers to accent surrounding drapery and our RGB 90 LED Strip Lights to accent dinner tables, bars, and light fixtures our client created an event that was simply unforgettable. The LED RGB Lights are being controlled by our Pro RGB Controller and powered by 12VDC Power Supplies for the Strip Lights and 24VDC Power Supplies for the Wall Washers. As you can see the outcome was breath taking and the host of this event was more than pleased.
Bright Star 20" x 2.3" Wall Washer 3 in 1 RGB - 30W, 24VDC
SKU: WW-SC-RGB4 View Product Page
This RGB LED Wall Washer is a 20" x 2.323" linear type light with 30W 24VDC rated power use. It has 10 RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 100 feet with a 50° beam angle. Mounting clips can slide and turn for custom installation and lighting angles. This light is encased in an IP67 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than four 30 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, CE and RoHS approved.
Ribbon Star 50/50, LED Strip Light RGB Lux - UL 24VDC
SKU: RL-DX-RLX-RGB-10 View Product Page
Our new UL Listed Ribbon Star RGBLux Strip Lights have the highest density of super bright 3 in 1 RGB SMD LEDs of any RGB strip light available on the market. Boasting 6 LEDs every 2.75" this strip has 72 more 5050 RGB chips than our 3m roll of popular RGB 180 LED Strip Light. This 118" (3m) LED strip can be cut every 2.75 inches and can be soldered to re-connect. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 54W of constant voltage 24VDC power needed for this 118" strip (5.4W per foot). This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets. UL Listed for class2 circuits, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product