The UL Listed flexible Ribbon Star 50/50 Blue LED Ribbon Strip Light is a super bright light source for many projects. This 118" (3m) strip can be cut every two inches and has many quick connection options for easy connection and use. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. There are three 50/50 SMD LEDs per two inches and 180 50/50 LED Chips for this 118" strip. Consuming 4.6W of 12VDC energy per foot, this 3M length requires at least a 46W 12VDC Power Supply. This LED Ribbon Strip is brighter than our Ribbon Star Max and the brightest Blue LED Strip that we carry. It can be used for overhead lighting, cove, under cabinet, backlighting and many more applications. Comes with two quick connectors (see picture>>). This product requires a 12VDC Constant Voltage power source. UL Listed for class 2 circuits, RoHS and CE approved.
|Click For Product Data Sheet
|50/50 12V Connection Guide
|LED Strip Light Comparison Guide
|Click For Wire to Strip Soldering Video
|Click For Overlap Strip Soldering Video
|Calculate Electrical Load
|* Power Supply capacity must be larger than minimum lighting load.
|Ribbon Star 50/50, Blue, 118" (3m)
|118"L x 0.40"W x 0.07"H
|2 Wire (+/-)
|LED Chip Type
|3 SMDs per 2 inches
|LEDs Per Strip
|180 SMD LEDs
|12VDC Constant Voltage
|4.6W per foot
|Max Serial Connection
|UL Listed, RoHS, CE
For B2B or Large Quantity Price Info Click Here
Heat Shrink Tubing - 1FT
SKU: OA-AM-HS-1FT View Product Page
Clear heat shrink tubing for covering soldered connections on indoor and outdoor LED strip lights and can also be used for wire management and wire harnesses. The non-waterproof type heat shrink will fit and shrink on 14mm, 12mm, 10mm, and 8mm strip lights. The waterproof type shrink tubing is marine grade with adhesive lining that can be used to add another layer of waterproofing to your outdoor LED strip lights that are installed in areas exposed to regular moisture and will work on our 12mm, 10mm. and 8mm waterproof strips.
Non Waterproof: 3/8 inch (10mm) 16mm Flat Width 2:1 Heat Shrink Tube Wire Wrap Clear.
Waterproof: 1/2 inch (13mm) 3:1 Waterproof Clear Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage.
(3) 5.5 x 2.1mm Barrel Jacks to 10mm Strip Light Connectors
SKU: RA-SC-RSU-RJ-3 View Product Page
Use these Jack connectors with our 10mm wide Ribbon Star Long Run 60 LED/m or Dim to Warm Strip Lights to connect to a power supply or controller that has a 5.5mm x 2.1mm Plug connector. 12" of lead wire. Sold in sets of 3. For use with 0.39" (10mm) wide ribbon products only. Maximum power load should not exceed 5A.
(3) 2" Ribbon wire Ribbon Connector for 10mm Strip Lights
SKU: RA-SC-RSU-RWRS-3 View Product Page
Use this connector on Ribbon Star Long Run 60 LED/m or Dim to Warm Strips to connect two strips with 2 inches of lead wire between connection. Best used to connect around corners or in tight spaces where a shorter connection wire is needed. Sold in sets of 3. For use with 0.39" (10mm) wide ribbon products only.
(5) Ribbon to Ribbon Connector for 10mm Strip Lights
SKU: RA-SC-RSU-RR-5 View Product Page
Use this connector to connect 10mm wide LED light strips from one end to another end. This connection is for the Ribbon Star Long Run 60 LED/m or Dim to Warm light strips. Sold in sets of 5. For use with 0.39" (10mm) wide ribbon products only.
Ribbon to Wire Strip Light Quick Connectors - 10mm 2 Wire
SKU: RA-SC-RSU-RW View Product Page
Use this connector on our 10mm wide, non-waterproof Ribbon Star Long Run 60 LED/m and Dim to Warm LED Strip Lights. The quick connector to 8 inches of lead wire will allow you to connect your ribbon to a power supply, PWM dimmer, or to other sections of ribbon. Sold in sets of 5, 10, 20, 50, and 100. Purchase larger quantities for a more competitive price. This connector is only meant for use with our 0.39" (10mm) wide two conductor ribbon products and is not guaranteed to work on any strip light products not sold by Ecolocity LED.
(3) Ribbon Wire Ribbon Connector for 10mm Strip Lights
SKU: RA-SC-RSU-RWR-3 View Product Page
Use this connector on Ribbon Star Long Run 60 LED/m or Dim to Warm Strips to connect two strip lights together with 10 inches of lead wire between connection. Can be used to connect around corners or in parallel runs. Sold in sets of 3. For use with 0.39" (10mm) wide ribbon products only.
Note: * Indicates a required field
- There are currently no reviews for this product