This RGB LED Wall Washer is a 20" x 2.323" linear type light with 30W 24VDC rated power use. It has 10 RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 100 feet with a 50° beam angle. Mounting clips can slide and turn for custom installation and lighting angles. This light is encased in an IP67 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than four 30 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, CE and RoHS approved.
|Model||Bright Star 20" x 2.3" RGB LED Wall Washer|
|Dimensions||19.84"L x 2.323"W x 2.867"H|
|Connection Type||4 Wire RGB(+)|
|Max Serial Connection||4 Wall Washers|
|Warranty Period||2 Year|
Wallwasher Water-Resistant RGB Connection wire 80"
SKU: LA-SC-1CON View Product Page
A waterproof connector with 4 conductor 18AWG stranded wire that can be used to connect our RGB wall washers to each other, to a controller or signal amplifier, or for quick and easy connection of any RGB LED product. 80" long with screw down connections, male on one end and a female on the other end. See link below for more ideas on quick and easy RGB LED connections.
4 Wire T Connector for RGB LED Wall Washers
SKU: LA-SC-2CON View Product Page
This T or elbow water-resistant connector can be used to connect our RGB wall washers to each other, to a contoller or signal amplifier, or can be used with our waterproof RGB connection wire to pigtails for easy connection with any RGB LED lighting system. 16.5" long with screw down connection, two males and one female. See the link below for an easy RGB LED connection guide using water-resistant RGB LED connection wires.
Waterproof Mini RGB LED Controller with RF Remote, 5-24VDC 4A/CH
SKU: LC-LF-8RGB View Product Page
This Mini Waterproof 5-24VDC RGB LED Controller is loaded with functionality and has an RF remote range of up to 50ft. It can be used to control color effects for common anode style 5-24VDC constant voltage RGB LED Lights. With 4A per channel output this controller can handle 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. Functions include 30 static colors with 5 levels of dim (minimum dim level %30), and 43 varieties of color flashing, strobing, and fading modes with 10 levels of speed adjustment. Each remote can be paired with a controller by pressing the power button and pause together within 5 seconds of DC power to the controller input. Power input is connected by 16AWG bare lead wires, and and signal output is connected by 18AWG bare wire leads. For quick and easy wire connections use some of our wire snap connectors found below. The mini controller (not remote) is IP68 waterproof rated but not designed to be submersed in water or directly exposed to outdoor elements.
Mean Well Waterproof LED Power Supply 240W - 24VDC
SKU: PS-MW-240-W-24 View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.