This RGB LED Wall Washer is a 40" X 2.323" linear type light with 60W 24VDC rated power use. It has 20 RGB 3 in 1 Epistar LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 100 feet with a 50° beam angle. Mounting clips can slide and turn for custom installation and lighting angles. This light is encased in an IP65 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than two 60 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, CE and RoHS approved.
|Model||Bright Star 40" x 2.323" RGB LED Wall Washer|
|Dimensions||39.5"L x 2.323"W x 2.867"H|
|Connection Type||4 Wire RGB(+)|
|Max Serial Connection||2 Wall Washers|
|Warranty Period||2 Year|
Wallwasher Water-Resistant RGB Connection wire 80"
SKU: LA-SC-1CON View Product Page
A waterproof connector with 4 conductor 18AWG stranded wire that can be used to connect our RGB wall washers to each other, to a controller or signal amplifier, or for quick and easy connection of any RGB LED product. 80" long with screw down connections, male on one end and a female on the other end. See link below for more ideas on quick and easy RGB LED connections.
4 Wire T Connector for RGB LED Wall Washers
SKU: LA-SC-2CON View Product Page
This T or elbow water-resistant connector can be used to connect our RGB wall washers to each other, to a contoller or signal amplifier, or can be used with our waterproof RGB connection wire to pigtails for easy connection with any RGB LED lighting system. 16.5" long with screw down connection, two males and one female. See the link below for an easy RGB LED connection guide using water-resistant RGB LED connection wires.
3 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH
SKU: LC-LT-RGB3-WIFI View Product Page
The WiFi-103 LED Controller uses the same cutting edge technology as our WiFi-102 LED Controller but also allows the user to use the controller over an existing home or business network. Use the WiFi-103 to control your RGB, two tone, or single color LED lights using any iOS or Android smart phone or tablet. One WiFi controller can be used as an RGB Controller, a Color Temperature Adjustable Controller, or a Single Color Dimmer. With a variety of built in modes, DIY functions, color wheel choices, as well as specific 0-255 brightness settings, this controller is as versatile as it gets. With output ratings of 4A x 3 channels this controller can handle up to 144W of RGB LED Lights, 96W of dual tone LEDs, or 144W of single color LED Lights. Each controller can be paired with an unlimited amount of WiFi-103 receivers using 2.4GHz RF signal. At 6A x 3 channels each wireless receiver can handle 216W at 12VDC or 432W at 24VDC, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes. CE and RoHS approved.
Mean Well Waterproof LED Power Supply 150W - 24VDC
SKU: PS-MW-150-W-24 View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.