SKU: PS-MT-300-12
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 300w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.
| SPECIFICATIONS | |
| Model | Magnitude LED Power Supply MLV Dimmable |
| SKU | PS-MT-300-12 |
| Dimensions | 4.20"L x 3.50"W x 9.81"H |
| AC Input Voltage | 120VAC |
| DC Output | 12VDC - 25A |
| Output Watts Max | 12VDC - 300W |
| Rating | Indoor/Outdoor |
| Warranty Period | 2 Years |
Ribbon Star 50/50, Waterproof Warm White LED Strip Light - UL 12VDC - 118" (3m)
SKU: RL-SC-RS50-T-WW-10 View Product Page
Our Ribbon Star 5050 waterproof strip light is an ideal solution for both indoor and outdoor backlight and task lighting applications that require a commercial grade, long lasting linear strip light. All of our UL Listed 5050 waterproof strips are encased in a waterproof silicon coating for an IP66 rating (non-submersible). This 118" (3 meters, 2" under ten feet) ribbon can be cut every two inches and re-connected for custom lighting layouts. Ribbon comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. Each roll comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. Three (3) 5050 SMD LEDs per 2", 4.6W per foot of Constant Voltage DC power required for this strip of light. Can be used for outdoor lighting, decks, patios, coves lighting, toe kicks, under cabinet, backlighting, crown molding and many more applications. UL Listed for class 2 luminaries and fixtures, RoHS and CE approved, 3000-3500K Color Temperature. This product is not intended to be submersed for extended periods.
LIPOD Aluminum Extrusion - 1" Wide x 1" Deep
SKU: EX-KL3-3 View Product Page
$24.49
$59.99
$98.99
$169.99
$169.99
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
