If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Limited power source output allows for class 2 wiring. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 60w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.
|Model||Magnitude LED Power Supply MLV Dimmable|
|Dimensions||2.59"L x 2.20"W x 6.06"H|
|AC Input Voltage||120VAC|
|DC Output||12VDC - 4.8A|
|Output Watts Max||12VDC - 60W|
|Warranty Period||2 Years|
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
Ribbon Star 50/50, Warm White LED Strip Light - UL 12VDC
SKU: RL-SC-RS50-WW-10 View Product Page
The UL Listed Flexible Ribbon Star 50/50 Warm White LED Ribbon Strip Light is a super bright light source for many projects. This 118" (3m) strip can be cut every two inches and has many quick connection options for easy connection and use. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. There are three 50/50 SMD LEDs per two inches and 180 50/50 LED Chips for this 118" strip. Consuming 4.6W of 12VDC energy per foot, this 3M length requires at least a 46W 12VDC Power Supply. This LED Ribbon Strip is brighter than our Ribbon Star Max and not quite as bright as our Ribbon Star Ultra. It can be used for overhead lighting, cove, under cabinet, backlighting and many more applications. Comes with two quick connectors (see picture>>). Requires a 12VDC Constant Voltage power source. This strip light is UL Listed for class 2 low voltage luminaries and fixtures, RoHS and CE approved, 3000-3500K Color Temperature.
PDS4 Aluminum Extrusions - .5" Deep
SKU: EX-KL1-1 View Product Page