SKU: RL-SC-RSM-T-G-10
The Ribbon Star Max TPU Waterproof flexible LED ribbon is a perfect solution for backlight and ambient light applications. The Waterproof Ribbon Star Max LED Ribbon is fully encased in a TPU coating for an IP68 rating. This 118" (3 meters, approximately 10 Feet) ribbon can be cut every one inch and has many quick connection options for easy connection. Ribbon comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. Each roll comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. Three (3) SMD LEDs per one inch, 2.92W per foot of Constant Voltage DC power required for this strip of light. Can be used for coves lighting, toe kicks, under cabinet, backlighting, crown molding and many more applications. This LED Strip is UL Recognized, RoHS and CE approved.
Click for Product Data Sheet |
Max Waterproof Connection Guide |
LED Strip Light Comparison Guide |
Click For Electrical Load Calculator |
SPECIFICATIONS | |
Model | Ribbon Star Max Waterproof, Green, 118" (3m) |
SKU | RL-SC-RSM-T-G-10 |
Dimensions | 118"L x 0.48"W x 0.28"H |
Connection Type | 2 Wire (+/-) |
LED Chip Type | 3528 |
LED Quantity | 3 SMDs per 1 inch |
LEDs Per Strip | 360 SMD LEDs |
Input Power | 12VDC Constant Voltage |
Watts | 2.92W per foot |
Beam Angle | 120° |
Rating | IP68 Waterproof |
Operating Temp | -49°~149°F |
Max Serial Connection | 30 Feet |
Certification | UL Recognized, RoHS, CE |
Warranty Period | 2 Years |
TPU End Cap for Single Color Waterproof LED Strips
SKU: RA-SC-RS-EC View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECH View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.
(3) Female Waterproof Ribbon to Wire Strip Light Connectors - 10"
SKU: RA-SC-RS-T-RWF-3 View Product Page
Use this 10" female connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof female end.
(3) Male Waterproof Ribbon to Wire Strip Light Connectors - 10"
SKU: RA-SC-RS-T-RWM-3 View Product Page
Use this 10" Male connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof male end.
(3) Male/Female Waterproof Ribbon to Ribbon Strip Light Connectors - 20"
SKU: RA-SC-RS-T-RWR-3 View Product Page
Use this 20" wire connector on our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strips to add 20 inches of lead wire between Waterproof strips. Waterproof Male and Female ends. Sold in sets of 3.
(10) Mounting Clips for Ribbon Star Waterproof Strip Lights
SKU: RA-SC-RS-T-CL-10 View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.