This LED module is a great entry-level backlight module for channel letters, halo lighting and sign lighting. This product easily conforms to circular and curved layouts. A total of three 5050 SMD chips provide ample lighting with a max power requirement of 0.72W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for cove and accent lighting and for use as under-cabinet general illumination. A constant voltage DC power source is needed to power this product. The plastic ABS shell and clear epoxy coating provides limited water-resistance to moisture. Not submersible or UV proof.
|Click For Product Data Sheet|
|Click For Electrical Load Calculator|
|Model||3 Chip LED Backlight Module - RGB|
|Dimensions||3.0" x 0.625" x 0.3125"H|
|Connection Type||4 Wire RGB(+)|
|LEDs Chip Size||5050|
|LEDs Quantity||3 LEDs per Module|
|Module Spacing||6.7" Center to Center|
|Module Count||10 per 5.58 ft|
50 per 27.9 ft
|Watts||0.72 Watts per module|
|Lumens||R: 5.63 lm|
G: 13.19 lm
B: 4.71 lm
|Operating Temp||-4° ~ 122°F|
|Max Serial Connection||50 Modules|
|Lifetime Hours||50,000 Hours|
|Warranty Period||1 Year|
|Downloads & Info|
|Click For Product Data Sheet|
22 Gauge RGB Connection Wire, Black+BGR
SKU: RA-SC-BBGR View Product Page
Our 4 conductor 22AWG bonded wire consists of a black, blue, green, and red wires designed for connection of indoor RGB LED lighting products. Use this connection wire to power and control RGB LED lighting using DC electrical Current. The quad pair stranded wire can be used with any of our 5-24VDC LED lighting products or soldered directly to any of our RGB LED Strip Lights. This wire comes in very handy when connecting to our indoor RGB Ribbon, RGB Modules or other low voltage RGB Lighting products. Choose from 50ft or 10ft wire lengths below.
Pro RGB LED Controller with RF Remote, 5-24VDC 6A/CH
SKU: LC-OL-5RGBC-WR View Product Page
Our Pro RGB LED Controller with 28 button RF Remote has many functions including custom color selection and DIY color effects for your RGB LED lighting control. On the top of the controller is a 16 button control pad and RGB indicator lights. Input power can be 5VDC, 12VDC or 24VDC (auto switching). Max power thru this controller is 6A x 3 channels, or 90W - 5VDC, 216W - 12VDC, 432W - 24VDC. It can be used to control our Ribbon Star RGB LED strip lights, RGB LED Modules or any 5-24VDC constant voltage RGB LED Lighting. This controller is designed for use with 4 pin, 3 loop, common anode style RGB products only. RGB and input connections are screw down type. The Pro RGB offers 5 storage buttons to record your favorite effects and settings. With 16 brightness level adjustments on Red, Green and Blue you can create 4,096 possible static colors, with seven storage buttons for your favorite colors. There are 29 built in modes with speed and brightness adjustments or create your own color effects with your seven static color choices. See the link in the specification chart below for a list of the 29 pre-programmed color modes. Each RF Remote control requires (1) CR2025 type battery, one is included.
Mean Well Plug-in LED Power Supply 40W - 12VDC
SKU: PS-MW-40-12 View Product Page
Our Mean Well brand 12VDC plug-in style, 40 Watt Constant Voltage LED AC/DC Power Transformer can be used in dry locations to output up to 40 Watts or 3.34 Amps of 12VDC power for 12VDC LED lights and controllers. The AC wall input is made through a common 3 prong wall plug cord and the 12VDC output uses a 5.5mm x 2.1mm female plug (5.5mm x 2.1mm male barrel jack included). Built in short-circuit, overload, and over voltage protection guards from damage do to improper installation. Use this LED power supply to connect 12VDC LED Strip Lights, LED Modules, LED Lights, RGB LED lighting and other LED Lighting products. UL listed, RoHs and CE approved.