SKU: MD-BW-ES4-RGB
This LED module is a great entry-level backlight module for channel letters, halo lighting and sign lighting. This product easily conforms to circular and curved layouts. A total of four 5050 SMD chips provide ample lighting with a max power requirement of 1.44W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for cove and accent lighting and for use as under-cabinet general illumination. A constant voltage DC power source is needed to power this product. The plastic ABS shell and clear epoxy coating provides limited water-resistance to moisture. This product is dot designed to be submersible or exposed to direct UV contact.
| Click For Product Data Sheet |
| Calculate Electrical Load | |
| * Power Supply capacity must be larger than minimum lighting load. | |
| SPECIFICATIONS | |
| Model | 4 Chip LED Backlight Module - RGB |
| SKU | MD-BW-ES4-RGB |
| Dimensions | 1.57" x 1.57" x 0.28"H |
| Connection Type | 4 Wire RGB(+) |
| LEDs Chip Size | 5050 |
| LEDs Quantity | 4 LEDs per Module |
| Module Spacing | 5.12" Center to Center |
| Module Count | 10 per 4.2 ft 50 per 20.83 ft |
| Input Power | 12VDC |
| Watts | 1.4 Watts per module |
| Beam Angle | 120° |
| Lumens | R: 7.5 lm G: 17.59 lm B: 6.28 lm |
| Rating | IP65 Water-resistant |
| Operating Temp | -4° ~ 122°F |
| Max Serial Connection | 50 Modules |
| Lifetime Hours | 50,000 Hours |
| Certification | CE, RoHS |
| Warranty Period | 1 Year |
| Downloads & Info |
| Click For Product Data Sheet |
| Wiring Diagrams |
 |
 |
 |
22 Gauge RGB Connection Wire, Black+BGR
SKU: RA-SC-BBGR View Product Page
Our 4 conductor 22AWG bonded wire consists of a black, blue, green, and red wires designed for connection of indoor RGB LED lighting products. Use this connection wire to power and control RGB LED lighting using DC electrical Current. The quad pair stranded wire can be used with any of our 5-24VDC LED lighting products or soldered directly to any of our RGB LED Strip Lights. This wire comes in very handy when connecting to our indoor RGB Ribbon, RGB Modules or other low voltage RGB Lighting products. Choose from 50ft or 10ft wire lengths below.
Mean Well Plug-in LED Power Supply 40W - 12VDC
SKU: PS-MW-40-12 View Product Page
Our Mean Well brand 12VDC plug-in style, 40 Watt Constant Voltage LED AC/DC Power Transformer can be used in dry locations to output up to 40 Watts or 3.34 Amps of 12VDC power for 12VDC LED lights and controllers. The AC wall input is made through a common 3 prong wall plug cord and the 12VDC output uses a 5.5mm x 2.1mm female plug (5.5mm x 2.1mm male barrel jack included). Built in short-circuit, overload, and over voltage protection guards from damage do to improper installation. Use this LED power supply to connect 12VDC LED Strip Lights, LED Modules, LED Lights, RGB LED lighting and other LED Lighting products. UL listed, RoHs and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
