This LED module is a great entry-level backlight module for channel letters, halo lighting and sign lighting. This product easily conforms to circular and curved layouts. A total of four 5050 SMD chips provide ample lighting with a max power requirement of 0.96W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for cove and accent lighting and for use as under-cabinet general illumination. A constant voltage DC power source is needed to power this product. The plastic ABS shell and clear epoxy coating provides limited water-resistance to moisture. Not submersible or UV proof.
|Click For Product Data Sheet|
|Calculate Electrical Load|
|* Power Supply capacity must be larger than minimum lighting load.|
|Model||4 chip LED Backlight Module - White|
|Dimensions||1.67" x 1.67" x 0.42"H|
|Connection Type||2 Wire (+/-) 20AWG|
|LEDs Chip Size||5050|
|LEDs Quantity||4 LEDs per Module|
|Module Spacing||5.5" Center to Center|
|Modules Per Foot||2.18 Modules|
|Watts||0.96 Watts per module|
|Lumens||88 lm per module|
|Operating Temp||-4° ~ 122°F|
|Max Serial Connection||50 Modules|
|Lifetime Hours||50,000 Hours|
|Warranty Period||1 Year|
|Downloads & Info|
|Click For Product Data Sheet|
2 Conductor DC Connection Wire Red/Black Pair - 22AWG
SKU: LA-SS-DC22 View Product Page
This is a 22 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.
PWM LED Knob Dimmer, 12-24VDC 30A
SKU: LC-LF-2DIM View Product Page
This small and simple LED Light Dimmer uses a knob to dim your 12-24VDC constant voltage LED lighting products from 0-100%. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. The small size of this PWM dimmer makes it easy to conceal and set the lights to the brightness level you prefer. Use this dimmer for LED strip lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.
Mean Well Plug-in LED Power Supply 40W - 12VDC
SKU: PS-MW-40-12 View Product Page
Our Mean Well brand 12VDC plug-in style, 40 Watt Constant Voltage LED AC/DC Power Transformer can be used in dry locations to output up to 40 Watts or 3.34 Amps of 12VDC power for 12VDC LED lights and controllers. The AC wall input is made through a common 3 prong wall plug cord and the 12VDC output uses a 5.5mm x 2.1mm female plug (5.5mm x 2.1mm male barrel jack included). Built in short-circuit, overload, and over voltage protection guards from damage do to improper installation. Use this LED power supply to connect 12VDC LED Strip Lights, LED Modules, LED Lights, RGB LED lighting and other LED Lighting products. UL listed, RoHs and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product