This extremely detailed lighting project was installed by our insanely talented customer clubTech, Miami. They used a large amount of our RGB LED Strip Lights to design lighting all over this night club. The lighting is being controlled by multiple DMX Decoders and a DMX Controller. Simply looking at the pictures I am blown away with the ability that RGB strip lights have to transform a space into something truly spectacular. If you are interested in using color changing linear strip lighting on any project, give us a call and we would be happy to help you.
Ribbon Star Lux RGB LED Strip Light - 84 LEDs per Meter - ETL 24VDC - IP20 & IP66
SKU: RL-DX-RLX-RGB View Product Page
Our ETL Listed Ribbon Star RGBLux Strip Lights have the highest density of super bright 3 in 1 RGB SMD LEDs of any RGB strip light available on the market. Boasting 6 LEDs every 2.75" this strip has 72 more 5050 RGB chips than our 3m roll of popular RGB 180 LED Strip Light. With a high density of LEDs, RGB Lux strip is ideal for creating line of light color changing fixtures using our aluminum strip light channels with plastic covers. This 118" (3m) LED strip can be cut every 2.75 inches and can be soldered to re-connect. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 54W of constant voltage 24VDC power needed for this 118" strip (5.4W per foot). This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets. ETL Listed for class2 circuits, RoHS and CE approved.
Ribbon Star 50/50, Waterproof LED Strip Light RGB Lux - UL 24VDC - 118" (3m)
SKU: RL-DX-RLX-RGB-T-3M View Product Page
Our heavy duty UL Listed 24VDC color changing RGB Lux LED Strip Light is encapsulated in a commercial grade IP66 waterproof housing using 252 super bright 3 in 1 RGB SMD 5050 LEDs per 118" to produce over 16 million shades of bright, vivid, and brilliant color. The strip is encapsulated in a durable silicon waterproof coating that provides protection from dust, moisture and UV. There are 6 5050 type surface mount LEDs every 2.75 inches. This 118" (3m) roll is excellent when you need a very colorful indoor or outdoor RGB light strip. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 54W of constant voltage 24VDC power needed for this 118" strip (5.4W per foot). This RBG LED light ribbon can be used for interior or exterior entertainment lighting, bar lighting, casino lighting, landscape lighting, yacht lighting, 24V Marine applications, patio lighting, deck lighting, or any other indoor or outdoor 24VDC application. Each roll includes a waterproof connector to bare wire at each end, all other accessories are sold separately. This LED Strip is UL Listed for class 2 luminaries and fixtures, RoHS and CE approved. This product is not intended to be submersed or used in underwater applications.
24 Channel LED DMX RDM Decoder, 5-24VDC 3A/CH
SKU: LC-EU-DMX-PX243 View Product Page
This DMX decoder allows for 24 Channels of LED lights to be controlled via a DMX control signal. With two DC power inputs, one for channels 1-12 and the other for 13-24, this LED decoder can control 12 channels of LED lights of similar or variating voltage inputs. This decoder accepts either XLR-3 type connections or bare wire connections for the DMX signal input and output. There are a total of eight, 3 channel, common anode outputs with screw-down terminal blocks for easy connection to your LED lights. This decoder is able to accept 5-24VDC at 3A per channel (twenty four channels total) for max load of 360W/5V, 864W/12V, or 1728W/24V. You can set the starting address of the DMX decoder via DIP switches located on the back of the unit. Please note that each DMX decoder requires 24 addresses in the DMX universe being used as well as a 5-24VDC driver large enough to power the lighting load. A built in LED light test mode is available with this DMX decoder. Power is isolated between channels 1-12 and 13-24, therefore two different voltage LEDs can be powered separately if needed. Systems with more than two DMX decoders being used require an XLR3 DMX terminator cable on the last DMX decoder in the series.