Aluminum Channels and LED Strip Lights Highlight this Outdoor Facade

Ribbon Star, Waterproof RGB 180 LED Strip Light - UL 24VDC - 118" (3m)

SKU: RL-SC-RS-RGB24-T-3M     View Product Page
Our commercial grade UL Listed 24VDC color changing RGB LED Strip Light is IP67 waterproof using 180 super bright 3 in 1 RGB SMD LEDs per 118" to produce over 16 million shades of brilliant color. The waterproof silicon housing makes this LED Strip durable in most conditions that require a waterproof, dustproof, and UV proof color changing linear light. This product is not intended to be submersed for extended periods. There are 6 LEDs every 4 inches. This 118" (3m) roll is excellent when you need a very colorful indoor or outdoor RGB light strip. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 43W of constant voltage 24VDC power needed for this 118" strip (4.3W per foot). This RBG LED light ribbon can be used for entertainment lighting, bar lighting, casino lighting, landscape lighting, yacht lighting, 24V Marine applications, patio lighting, or any other indoor or outdoor 24VDC application. Each roll includes a waterproof connector at each end, additional connector to bare wire, 2 end caps without holes, 2 end caps with wire holes and 10 mounting clips, all other accessories are sold separately. See link below for demonstration video. This LED Strip is UL Listed for class 2 luminaries and fixtures, RoHS and CE approved.

STICK DMX Control Panel with Software and 6VDC Power Supply - 1024 Channel

SKU: LC-NL-STICK     View Product Page
The redesigned STICK-KE2 controller returns with a new stylish look and more powerful interface. The unit faceplate is mounted to the wall and is compatible with most standard US and European electrical boxes. This controller features two separate DMX512 universes for a total of 1024 DMX channels. The versatility of this premium DMX controller allows it to either function via a USB to a computer connection or to run in stand alone mode with the use of an included mini SD card (with standard SD card adapter for computer) and 6VDC transformer. All these features combine to make the STICK the best choice for high-end commercial displays, night clubs, bars, restaurants, theaters, stadium, and state-of-the-art home lighting designers. STICK hardware faceplate, software CD-ROM, mini USB cable, mini SD card with adapter, and 6VDC power supply included. Free computer software is available for both windows and mac. A built in Ethernet card allows for IP addressing of a STICK controller and also allows for the ability to be controlled via a smart phone application through the use of a networked Wi-Fi connection. Additional features included RS232 three pin capability (RX TX and GND), four additional ports (5-8), and two wire relay.

24 Channel LED DMX RDM Decoder, 5-24VDC 3A/CH

SKU: LC-EU-DMX-PX243     View Product Page
This DMX decoder allows for 24 Channels of LED lights to be controlled via a DMX control signal. With two DC power inputs, one for channels 1-12 and the other for 13-24, this LED decoder can control 12 channels of LED lights of similar or variating voltage inputs. This decoder accepts either XLR-3 type connections or bare wire connections for the DMX signal input and output. There are a total of eight, 3 channel, common anode outputs with screw-down terminal blocks for easy connection to your LED lights. This decoder is able to accept 5-24VDC at 3A per channel (twenty four channels total) for max load of 360W/5V, 864W/12V, or 1728W/24V. You can set the starting address of the DMX decoder via DIP switches located on the back of the unit. Please note that each DMX decoder requires 24 addresses in the DMX universe being used as well as a 5-24VDC driver large enough to power the lighting load. A built in LED light test mode is available with this DMX decoder. Power is isolated between channels 1-12 and 13-24, therefore two different voltage LEDs can be powered separately if needed. Systems with more than two DMX decoders being used require an XLR3 DMX terminator cable on the last DMX decoder in the series.

Mean Well LED Power Supply CV 1000W - 24VDC

SKU: PS-MW-1000-24     View Product Page
This Mean Well 1000W, 24VDC LED Power Supply / Transformer, has a 100 - 240AC input and 24VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 900 watts of 24VDC LED lights. Only install face up with sufficient breathing space.