A Mean Well brand IP67 Waterproof 60W, 24VDC LED transformer / power supply recommended for use with our 24VDC LED Strip Lights and LED Wall Washers or any other LED Light requiring a 24VDC Constant Voltage power source. 100 - 130VAC input only and a 24VDC, 2.5A output. For wet or damp locations, do not expose to constant liquid, vapor, rain, or sunlight. Has one DC output connection to be used to connect our 24VDC LED products to an AC Power source. CE & RoHS certified; IP67, non-submersible, UL recognized.
|Model||60W, 24VDC Waterproof LED Power Supply|
|Dimensions||6.4"L x 1.67"W x 1.26"T|
|AC Input Voltage||100 - 240VAC|
|DC Output||24VDC / 2.5A|
|Output Watts Max||60 Watts|
|Warranty Period||1 Year|
Bright Star 3 in 1 RGB LED Flood Light - 50W, 24VDC
SKU: WW-LG-RGB-F1 View Product Page
Our outdoor rated color changing RGB LED Flood lights pack an impressive amount of lighting into a small positionable fixture. Inside the housing is 15 Epistar RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, trees, buildings, architecture, sculptures, displays and signs. With the right RGB controller(s) this fixture can output over 16,700,000 shades of vivid color and can also be incorporated with other RGB lighting products. This light is encased in an IP65 water-resistant aluminum alloy shell. Tempered glass and stainless fasteners give this light long lasting outdoor use. The light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. . Each fixture has one female and one male connector, power can be input from either connector or both, we recommend no more than 2 flood lights be connected in a series when powered from one end. Each fixture includes one connector to bare wire and one end cap for the other connector lead. This product is non-submersible, RoHS and CE approved.
Ribbon Star 50/50, 4 in 1 Waterproof RGBW LED Strip Light - ETL 24VDC - 118" (3m)
SKU: RL-DX-4IN1-W-T-10 View Product Page
Our 4in1 RGBW Waterproof strip light provides color changing plus single color lighting in a waterproof and customizable package. The IP67 rated strip can be cut and re-connected every 3.93" (10cm) to conform to any indoor or outdoor layout. The 4in1 chip provides denser light dispersion with color changing options and the addition of a 5700-6500K bright white output. Each roll includes a 3M long strip light in encapsulated hollow silicon housing with an 11" lead to bare wire on each end. A common anode 5 wire RGBW color controller or DMX decoder and constant voltage 24VDC power source is required to operate. Each strip light is ETL listed for class 2 circuits, RoHS and CE approved.
110V Wall Plug Cord - Two Prong - 6ft.
SKU: LA-EL-CON2 View Product Page
A two prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. Approximately 6' long, 2 prong, 2 wire. Rated for 125V AC maximum. Plug is polarized for use with NEMA 1 and NEMA 5 type receptacles. The wire with several ridges on outer plastic coating is Neutral, the opposite wire is Load (Hot, Live).
Note: * Indicates a required field
- There are currently no reviews for this product