*NOTE: THIS IS NOT A DIMMER FOR 0-10V LED LIGHTS*
A single channel LED PWM Dimmer for use with 0-10V Control Signal or a Momentary On/Off Push switch. Compatible 0-10V controls include Lutron Diva, part# DVTV, and the Lutron Nova, part# NTFTV, as well as Graffik Eye Systems with certain interfaces and panels including TVM Modules, or RadioTouch RF wireless control systems. Smooth 0-100% dimming and on/off can also be achieved by a simple momentary on/off push style switch (as seen in additional product photo). Input power source must be 12-24VDC, as well as 12-24VDC output power from one output port to your single channel LED Lighting product. One channel, 10A per channel with a maximum power of 120W at 12VDC, 240W at 24VDC. For use with common anode style LED Lighting. The power supply and signal wires are connected by screw down type wire connections. RoHS and CE approved.
|Model||1 Channel 0-10V / Push PWM Dimmer 12 - 24VDC|
|Dimensions||6.94"L x 1.75"W x 1.19"H|
|Constant Voltage DC Power||12 - 24VDC 10A per Channel Max|
|Watts||12VDC - 120W|
24VDC - 240W
|Warranty Period||1 Year|
Mean Well LED Power Supply Three Output 200W - 12VDC
SKU: PS-MW-200-12 View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
Ribbon Star Ultra 2, White LED Strip Light CRI 90 - UL 12VDC
SKU: RL-SC-UT12-W-10 View Product Page
Version 2 of our Ribbon Star Ultra White LED Strip has a smaller and brighter PC design with extremely durable and flexible 2110 size CRI 90+ LED chip. This new chip can be cut to fit any size and outputs extremely bright, dot free, high CRI color popping illumination. 1200 LEDs per Strip makes Ultra 2.0 the ideal choice for pairing with our aluminum channels to build custom lighting fixtures for upscale residential and commercial uses. Embed into drywall, use under cabinets, light up a display, the applications are endless. Each roll of Strip Light has heavy duty 3M™ mounting tape on the back, for the best long-term mounting solution. Each foot of strip light consumes 6.1 watts of 12VDC power. An adequate 12VDC Constant Voltage power source is required. One bin keeps the 5750-6250K color temperature consistent from order to order. We recommended that you mount this to steel or aluminum for a good heat sink. UL Listed for class2 luminaries and fixtures, CE and RoHS compliant.
Note: * Indicates a required field
- There are currently no reviews for this product