Header Logo
Orders Shipped within Continental United States * Non Oversized Items

RGB LED Wall Washers Light up a building Facade with Color

Product Description

Our local customers, Have Lights Will Travel, recently installed 14 of our 24VDC 40" RGB LED Wall Washers at the Washoe County Sheriff's Office located in Reno, NV. Using our 10 Zone Color Wheel Controller and multiple wireless receivers they were able to adjust the colors of the wall washers in zones rather than only having the option of the lights being the same color at the same time. As you can see the projection of the wall washers is great enough to light up the concrete entryway. Power is being driven using 24VDC Power Supplies. This was a fun project to see and we are glad that we can be apart of lighting up our local community with low voltage color changing LED lighting.

Reveal - Click the arrow or text to reveal answers.
CSR - Customer service representatives.
Purchaser - Verified purchasers of this product.

Bright Star 40" x 2.3" Wall Washer 3 in 1 RGB - 60W, 24VDC

SKU: WW-SC-RGB5     View Product Page
This RGB LED Wall Washer is a 40" X 2.323" linear type light with 60W 24VDC rated power use. It has 20 RGB 3 in 1 Epistar LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 100 feet with a 50° beam angle. Mounting clips can slide and turn for custom installation and lighting angles. This light is encased in an IP65 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than two 60 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, CE and RoHS approved.

Bright Star 40" x 2.3" Wall Washer 3 in 1 RGB - 60W, 24VDC

Mean Well Waterproof LED Power Supply 600W - 24VDC

SKU: PS-MW-600-W-24     View Product Page
This product is a waterproof IP65 rated Mean Well brand 600W, 24VDC LED transformer designed to convert 100-240VAC or 277VAC power to 24VDC. With a 25A maximum output this transformer can drive up to 600 watts of 24VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 12.5 amps of current. Each Mean Well HLG-600H-24A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well Waterproof LED Power Supply 600W - 24VDC

Color Wheel RGB 10 Zone Controller and Receiver Kit, 5-24VDC 6A/CH

SKU: LC-LT-RGBB-KIT     View Product Page
This 10 zone syncing RGB LED Controller with Color Wheel remote is a one of a kind RGB LED Controller with memory and zone capabilities. Capable of 18 pre-programmed modes with speed and brightness adjustment as well as color wheel static color control. Sync an unlimited amount of 18 Amp RGB LED Receivers to up to 10 different zones within the 150ft RF Control Signal radius (line of sight) to create amazing syncing color effects in multiple locations. Easily control each zone individually, in groups, or all zones as one through the remote keypad. The color wheel remote is powered through a built in 5V lithium battery and charged using an included USB to mini USB cord. One kit includes one memory Color Wheel Remote and one Receiver. Any additional receivers can be sold separately. Watch the product video to see some of the functionality of the color wheel choices, modes, and zone control.

Color Wheel RGB 10 Zone Controller and Receiver Kit, 5-24VDC 6A/CH
RF Remote & Zone Receiver
Out of Stock
Additional Zone Receiver
Notify me when this item is in stock
My Cart
Your Cart is currently empty.
Registered Users
Keep my login information