Header Logo
COVID-19 UPDATE: How Ecolocity LED is responding. Learn more >

Waterproof Neon RGB LED Strip Light, Top Emitting - ETL 24VDC - 197" (5m) NEW!

SKU: LN-DX-NEON-RGB-5

Product Description

Create dot free color changing illumination without the addition of a plastic cover or diffuser using our top emitting RGB neon strip light. A special milky silicon coating is extruded around a high density 24VDC RGB strip light to create brilliant line of light 180° color output without any visible dots or hot spots. Constructed with a double-hollow air layer for good heat dissipation this strip is ideal for accent lighting around rooms, signs, displays and so much more. Six 5050 LEDs per every 1.97" cuttable section this strip outputs an impressive 213 lumens per foot when all colors are on full brightness. Create millions of color varieties with the right 24VDC color controller. Keep in mind that this strip is top emitting and will only bend on a vertical axis. Once the strip is cut it must be soldered to re-connect and then sealed using an outdoor rated silicon adhesive. Double sided tape will not stick to the silicon material of this strip. Each 5 meter roll comes with 15 mounting clips, 15 self-tapping screws, 1 wire lead setup, and one end cap. Requiring 7.3 watts of 24VDC power for each foot, the entire roll of 16.4ft would need 120 watts minimum of 24VDC power to light on full brightness. This product is ETL listed, RoHS and CE approved.

Product Downloads
Click For Product Data Sheet
RGB Neon Soldering Tutorial
Calculate Electrical Load
Enter Length:  
* 7.3 Watts =
0.00 Watts
* Power Supply capacity must be larger than minimum lighting load.
Product Specifications
SPECIFICATIONS
ModelWaterproof Neon RGB LED Strip Light, Top Emitting - ETL 24VDC - 197" (5m)
SKULN-DX-NEON-RGB-5
Dimensions197" x 0.59" x 0.47"H
Connection Type4 Wire RGB(+)
LED Chip Type5050
LED Quantity6 SMDs per 1.97 inches
LEDs Per Strip600 RGB 3 in 1 SMD LEDs
Input Power24VDC Constant Voltage
Watts7.3W per foot
Beam Angle180°
Lumens213 lm/ft
RatingIP66 Waterproof
Ambient Temperature-4°~113°F
Max Serial Connection20 Feet
CertificationETL Listed, RoHS, CE
Product Lifetime50,000 Hours
Warranty Period2 Years
Reveal - Click the arrow or text to reveal answers.
CSR - Customer service representatives.
Purchaser - Verified purchasers of this product.

For B2B or Large Quantity Price Info Click Here

Aluminum Mounting Track for 15mm Top Emitting Round LED Neon

SKU: LN-DX-NEA-AP-17B     View Product Page
This product is a 1 meter long (3.28ft) aluminum track for mounting our top emitting and round top RGB and single color LED neon flex. This product is intended only for our 15mm RGB, white and warm white top emitting neon flex strips listed below. Each 3.28 foot of mounting track includes two 1" long self tapping screws. The track is designed with extra space for screw heads so there is no need to counter sink. Simple to installation by mounting the track and pushing the LED neon flex strip into place. This track enables smooth and straight linear lighting, with no sags, annoying light dots or hot spots. Please note that factory wire leads, end caps, and connectors do not fit inside the track.

Aluminum Mounting Track for 15mm Top Emitting Round LED Neon

Silicone End Cap with Hole and 4 Wire Lead for Round Top Emitting RGB Neon Flex

SKU: LN-DX-NTR-RGB-ECH     View Product Page
A 12" long 22AWG 4 wire solder lead with white PVC jacket and one holed end cap for re connection of our RGB Top Emitting Round Neon Flex Strips. The wire lead must be soldered when cutting and re-connecting our single channel top emitting round neon flex strips. Silicone Adhesive is required to maintain IP66 waterproof level. Wires are cut shorter and pre-tinned on the end intended for soldering. All additional accessories are listed found below.

Silicone End Cap with Hole and 4 Wire Lead for Round Top Emitting RGB Neon Flex

Silicone End Cap for Round Top Emitting Neon Flex

SKU: LN-DX-NTR-EC     View Product Page
A silicone end cap for sealing non wired ends of both our RGB and Single Color Top Emitting Round Neon Flex Strips. This end cap is intended only for the Round topped version of the flex strip. Silicone Adhesive is required to maintain IP66 waterproof level. All accessories can be found in products listed below.

Silicone End Cap for Round Top Emitting Neon Flex

Precision Micro Shears for Silicone Strip Housing and Small Wires

SKU: OA-AM-SIL-CUT     View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicone housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").

Precision Micro Shears for Silicone Strip Housing and Small Wires

RTV 4500 High Strength Silicone Sealant

SKU: OA-AM-SIL-GLU     View Product Page
Use the RTV 4500 high strength silicone sealant to adhere end caps and connectors to our waterproof silicone LED Strip Lights and Neon Flex Lights.

RTV 4500 High Strength Silicone Sealant

Product Reviews

Note: * Indicates a required field

Review Information

(email address will not be displayed)
Your Rating
reCAPTCHA Verification

- There are currently no reviews for this product

FREE SHIPPING OVER $200
Orders Shipped within Continental United States * Non Oversized Items
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information
Top