SKU: RL-SC-RS-RGB1-T-10
Our rugged, dependable, flexible and waterproof Ribbon Star RGB 180 LED Strip Light has super bright 3 in 1 RGB SMD LEDs on board and can produce 16 million shades of brilliant color. The heavy duty IP67 encapsulated silicon housing is outdoor rated, waterproof (non-submersible) dust and UV proof. There are 3 LEDs every 2 inches. This 118" (3m) roll is excellent when you need a commercial grade, color changing indoor or outdoor RGB light strip. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 43W of constant voltage 12VDC power needed for this 118" strip (4.3W per foot). This RBG LED light ribbon can be used for outdoor architectural, landscape, accents, pathway, entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets. Each roll includes 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. See link below for demonstration video. This LED Strip is UL Listed for class 2 circuits, RoHS and CE approved.
Click For Product Data Sheet |
LED Strip Light Comparison Guide |
Click For Electrical Load Calculator |
SPECIFICATIONS | |
Model | Ribbon Star RGB 180 LED Waterproof 118" (3m) |
SKU | RL-SC-RS-RGB1-T-10 |
Dimensions | 118" x 0.52" x 0.28"H |
Connection Type | 4 Wire RGB(+) |
LED Chip Type | 5050 |
LED Quantity | 3 SMDs per 2 inches |
LEDs Per Strip | 180 RGB 3 in 1 SMD LEDs |
Input Power | 12VDC Constant Voltage |
Watts | 4.3W per foot |
Beam Angle | 120° |
Lumens | 152 lm/ft |
Rating | IP67 Waterproof |
Operating Temp | -4°~104°F |
Max Serial Connection | 16 Feet |
Certification | UL Recognized, RoHS, CE |
Warranty Period | 2 Years |
For B2B or Large Quantity Price Info Click Here
TPU End Cap for RGB Waterproof LED Strips
SKU: RA-SC-RS-RGB-EC View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your Color Changing Ribbon Star RGB LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for RGB Waterproof LED Strips
SKU: RA-SC-RS-RGB-ECH View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof RGB strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.
(2) Female Connector to Pigtail Lead wires, 4 wire Waterproof 24"
SKU: RA-SC-RGB-RWF-2 View Product Page
This product is an easy to use waterproof RGB four conductor female connection wire. Plug directly into a matching male waterproof RGB connection wire to assemble a simple and quick waterproof RGB connection wire.
(2) Male Connector to Pigtail Lead wires, 4 wire Waterproof 24"
SKU: RA-SC-RGB-RWM-2 View Product Page
This product is an easy to use waterproof RGB four conductor male connection wire for LED lights. Plug directly into a matching female waterproof RGB connection wire to assemble a simple and quick waterproof RGB connection wire.
(2) Ribbon wire Ribbon Connector 4 wire Waterproof 24"
SKU: RA-SC-RGB-RWR-2 View Product Page
This product is an easy to use waterproof RGB four conductor connection wire. Plug directly into a matching male or female waterproof RGB connection wire to assemble a simple and quick waterproof RGB connection wire.
(10) Mounting Clips for Ribbon Star Waterproof Strip Lights
SKU: RA-SC-RS-T-CL-10 View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.