A RGB LED Signal Amplifier / Repeater that can be used to add more RGB LED modules, RGB LED Ribbon or RGB LED Lights to your existing RGB LED controller and will allow the additional lights to perform the same color changes as the RGB lights that are connected to the main controller. By adding this RGB Amplifier and another power supply you can add more RGB Lighting to your existing RGB lights. For use with Constant Voltage power, 12-24VDC systems only. 5A per channel with a maximum power of 180W at 12VDC and 360W at 24VDC, through this amplifier. For use with 4 pin, 3 loop, common anode style RGB Lighting. The power supply and RGB signal wires are connected by screw down type wire connections.
|Model||12 - 24VDC Signal Amplifier|
|Dimensions||6.5"L x 1.7"W x 1.0"H|
|Constant Voltage DC Power||12 - 24VDC 5A per Channel Max|
|Warranty Period||1 Year|
Ribbon Star 50/50, LED Strip Light RGB Lux - ETL 24VDC
SKU: RL-DX-RLX-RGB-3M View Product Page
Our ETL Listed Ribbon Star RGBLux Strip Lights have the highest density of super bright 3 in 1 RGB SMD LEDs of any RGB strip light available on the market. Boasting 6 LEDs every 2.75" this strip has 72 more 5050 RGB chips than our 3m roll of popular RGB 180 LED Strip Light. With a high density of LEDs, RGB Lux strip is ideal for creating line of light color changing fixtures using our aluminum strip light channels with plastic covers. This 118" (3m) LED strip can be cut every 2.75 inches and can be soldered to re-connect. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 54W of constant voltage 24VDC power needed for this 118" strip (5.4W per foot). This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting and in theater sets. ETL Listed for class2 circuits, RoHS and CE approved.
Bright Star 3 in 1 RGB LED Flood Light - 50W, 24VDC
SKU: WW-LG-RGB-F1 View Product Page
Our outdoor rated color changing RGB LED Flood lights pack an impressive amount of lighting into a small positionable fixture. Inside the housing is 15 Epistar RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, trees, buildings, architecture, sculptures, displays and signs. With the right RGB controller(s) this fixture can output over 16,700,000 shades of vivid color and can also be incorporated with other RGB lighting products. This light is encased in an IP65 water-resistant aluminum alloy shell. Tempered glass and stainless fasteners give this light long lasting outdoor use. The light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. . Each fixture has one female and one male connector, power can be input from either connector or both, we recommend no more than 2 flood lights be connected in a series when powered from one end. Each fixture includes one connector to bare wire and one end cap for the other connector lead. This product is non-submersible, RoHS and CE approved.
Mean Well LED Power Supply Three Output 200W - 24VDC
SKU: PS-MW-200-24 View Product Page
A Mean Well 200W 24VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 24VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 24VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
Note: * Indicates a required field
- There are currently no reviews for this product