22 Gauge 5 Conductor RGBW Connection Wire

(10) 5 Pole RGBW Clamp Down Lever Wire Nut with Fixed Holder

SKU: LA-LU-BC-5B-10     View Product Page
Our five wire clamp down connectors are a simple and reusable connector designed for our 5 wire RGBW products. Simply pull up the tabs, insert 12-28AWG and snap the tab back into place. This connector can be used for both low and high voltage not exceeding 32A or 250V. Each connector has two fixed screw holes for permanent installations.

Ribbon Star 4 in 1 RGBW LED Strip Light - 60 LEDs per Meter - ETL 24VDC - IP20 & IP67

SKU: RL-DX-4IN1-W     View Product Page
This innovative 4 color RGBW LED Strip Light combines RGB and White into a single 4 in 1 style 5050 LED Chip for brilliant color lighting and effects with the addition of a true cool white (6000-6500K) or warm white (2800-3200K) output. With ordinary RGB strip lights colors like white and warm white are nearly impossible to achieve. With the 4 in 1 RGBW strip light you can choose from colored lighting for certain events or holidays, and then switch your lighting to a cool white output when functional lighting is needed, or you can always combine the RGB and white output for over 4 billion color options. The ETL Listed RGBW LED Strip has (6) 4 in 1 RGBW 5050 LED Chips every 4 inches, making the outputs twice as dense as our standard RGBW strip. Cut this strip light every 4 inches and reconnect by soldering bare wires to the copper pads surrounding the cut points. Each 118" roll comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 51W of constant voltage 24VDC power is needed for each 118" strip (5.1W per foot). The LED Strip Light can be controlled using our 4 Channel RGBW Controllers or through 4 DMX channels in a DMX universe. For optimal light output we recommend you connect these lights no longer than 30ft in series. This strip light is ETL Listed, RoHS and CE approved.

Ribbon Star 50/50, 4 in 1 RGBWW LED Strip Light - ETL 24VDC

SKU: RL-DX-4IN1-WW-3M     View Product Page
This innovative 4 color RGBWW LED Strip Light combines RGB and Warm White into a single 4 in 1 style 5050 LED Chip for brilliant color lighting and effects with the addition of a true warm white (2800-3200K) output. With ordinary RGB strip lights colors like white and warm white are nearly impossible to achieve. With the 4 in 1 RGBWW strip light you can choose from colored lighting for certain events or holidays, and then switch your lighting to a warm white output when functional lighting is needed, or you can always combine the RGB and warm white output for over 4 billion color options. The ETL Listed RGBWW LED Strip has (6) 4 in 1 RGBWW 5050 LED Chips every 4 inches, making the outputs twice as dense as our standard RGBWW strip. Cut this strip light every 4 inches and reconnect by soldering bare wires to the copper pads surrounding the cut points. Each 118" roll comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 51W of constant voltage 24VDC power is needed for each 118" strip (5.1W per foot). The LED Strip Light can be controlled using our 4 Channel RGBW Controllers or through 4 DMX channels in a DMX universe. For optimal light output we recommend you connect these lights no longer than 30ft in series. This strip light is ETL Listed, RoHS and CE approved.

Color Wheel RGBW 8 Zone Programmable Controller and Receiver Kit, 5-24VDC 5A/CH

SKU: LC-LT-RGBW-T4-KIT     View Product Page
The state of the art T4 RF remote and four color RGBW wireless receiver has the ability to control the color effects of your 5-24VDC RGB+W, RGB+WW, or any 5-24VDC 4 color constant voltage lighting product. Each color wheel RF remote is specially paired by the user to any given amount of receivers over 8 zones (optional). Advanced control technology lets the user switch from "sync" and "zone" mode for smooth color changing control using multiple wireless receivers within the 2.4GHz RF range of 100ft (line of sight). Simply change the color effects of each zone individually, in groups, or all zones as one through the T4 remote control. Choose from 10 pre-programmed modes with speed, brightness, skipping, smooth fade, and strobe options or choose from an array of colors on the color wheel with independent single color dimming control. A specialized DIY function lets the user create custom color changing scenes up to 8 colors with speed and brightness control. In zone mode you can create one custom lighting scene per zone. In sync mode you can save 8 of your favorite custom color scenes by pressing and holding the number key pad. Previous color settings are stored to the wireless receivers when power is turned on and off. Each 4 channel receiver can control up to 5 amps of 5-24VDC LEDs per channel, or 60W per channel at 12VDC (240W Max); and 120W at 24VDC (480W Max). The color wheel remote is powered through a built in 5V lithium battery and charged using an included USB to mini USB cord. One kit includes one memory RGBW T4 Color Wheel Remote and one RGBW 4 Channel Receiver, additional wireless receivers are sold separately.