Our ES3 4in1 5050 SMD 3 chip RGBW modules offer a four color, long lasting and maintenance free IP65 lighting solution for 4"-8" deep channel letters, signs, displays, decoration, advertisement, light boxes and general accent lighting. Low power consumption of only 0.96W of 12VDC power per module offer an energy saving color changing attractive lighting solution. A maximum of 20 modules can be powered from one end in a serial connection or 40 modules maximum with power to each end of the module strings. For longer lighting runs use a series of parallel connections. An RGBW color controller or 4 channel DMX decoder is required to access the billions of color hues that each modules is capable of outputting. The connected RGBW controller will need a 12VDC power source and a minimum of 19.2 Watts to power the load of 20 RGBW modules on full brightness. The module base is constructed of PVC plastic with an epoxy filling for an IP65 water and dust resistant rating but are not intended to be exposed to UV or submersion. These modules are CE and RoHS approved.
|Click For Product Data Sheet|
|Click For Electrical Load Calculator|
|Model||3 Chip LED Backlight Module - RGBW|
|Dimensions||3.62" x 0.63" x 0.20"H|
|Connection Type||5 Wire RGBW(+)|
|LEDs Chip Size||5050|
|LEDs Quantity||3 LEDs per Module|
|Module Spacing||6.38" Center to Center|
|Module Count||20 per 10'5"|
|Watts||0.96 Watts per Module|
|Lumens||24 Lumens per Module|
|Operating Temp||-40° ~ 140°F|
|Max Serial Connection||20 Modules|
40 Modules Looped Circuit
|Lifetime Hours||50,000 Hours|
|Warranty Period||1 Year|
4 Knob RGBW LED Controller with Digital Display & RF Remote, 12-24V 5A/CH
SKU: LC-LF-3RGBW View Product Page
Our 4 Knob RGBW LED Controller can be used to control your 4 Color RGBW LED Strip Lights, modules, or 12-24VDC constant voltage lighting fixtures. The digital display above each knob lets you see the 0-255 dimming values of your Red, Green, Blue, and White output levels. Combining all the options of each output you can create over 4 trillion different color hues and fine tune any color that you want. 37 built in color changing effects with speed and brightness adjustments can be accessed using the RF remote control. Each of the 4 color outputs can control up to 5 amps of LED lighting, or 60 watts using 12VDC, 120 watts using 24VDC. Multiply that value over the 4 channels and you can control up to 240 watts max at 12V or 480 watts max at 24V.
Mean Well Waterproof LED Power Supply 60W - 12VDC
SKU: PS-MW-60-W-12 View Product Page
This 60 Watt Constant Voltage LED Power Supply by Mean Well is suitable for wet or dry locations and is capable of supplying no more than 60W or 5 Amps of 12VDC power output. This AC/DC transformer takes a 100-240VAC input and converts it to a 12VDC output for a Class 2 rating. Built in overload, and over voltage protection protect this power supply from incorrect installation. Use this Mean Well LED Power supply to power 12VDC constant voltage LED Strip lights, LED Modules, or any other LED product with a 12VDC rating. The IP67 water-resistant rating is not intended for direct exposure to outdoor elements. UL recognized, class 2, and LPS approved.
22 Gauge 5 Conductor RGBW Connection Wire
SKU: RA-SC-RGBW View Product Page
Our 22AWG 5 conductor RGBW stranded wire is made for use with our indoor RGB+W and RGB+WW LED Strip lights and lighting controls. Solder the wire directly to the strip light or use our strip light quick connectors and our other wire connectors to extend the lead of your RGBW LED strip lights. Choose from 50ft or 10ft wire lengths below.