This Digital RGB LED Ribbon Kit is our premier product for night club, bar, restaurant, casino, stage show and indoor decorative lighting. With the capability of 16 different modes there is no shortage to the amount of amazing effects you can achieve with our Digital RGB LED Ribbon product. Thanks to the inclusion of an IC control chip per every 3 LED segment our UL Listed Digital RGB LED Ribbon can produce brilliant displays that traditional RGB LED Strip Lights cannot. Kit includes 1 - 16.4ft (5m) Digital RGB LED Ribbon Strip 12mm wide (no quick connectors for this product), 1 - Digital RGB Controller w/ RF Remote (1020 Pixels Max) and 1 - 40W / 12VDC Wall Plug Style Power Supply. Each roll of Digital RGB LED Ribbon comes pre-fabricated with a male 4-wire quick connector on one end and a 5.5mm x 2.1mm Barrel jack and female 4-wire quick connector on the opposite end for easy hookup and installation of additional Digital RGB LED Ribbon strips. You can add up to 19 additional 16.4ft Digital Ribbon rolls and 40W Wall Plug Power supplies for a total of twenty 16.4ft (5m) rolls and twenty power supplies per one Digital RGB Controller. 328 ft (100.0m) of Digital RGB LED Ribbon max per controller.
|Model||Digital RGB LED Strip Light Kit|
|Dimensions||Ribbon: 197"L x 0.50"W x 0.16"H; Controller: 5.30" x 1.18" x 0.80"H|
Power Supply: 4.5" x 2.0" x 1.25"H
|Constant Voltage Control Type||TTL/SPI Digital RGB|
|Constant Voltage DC Power||12VDC|
|Watts||Ribbon - 31W Controller - 2.2W Power Supply - 40W|
|Rating||Indoor / Dry|
|Warranty Period||1 Year|
|Downloads & Info|
|Click For Ribbon Data Sheet|
|Click For Controller Data Sheet|
|RGB Strip Light Soldering Tutorial|
For B2B or Large Quantity Price Info Click Here
SILER Aluminum Extrusion for Waterproof Strips - .5" Deep
SKU: EX-KLWP-1 View Product Page
Heat Shrink Tubing - 1FT
SKU: OA-AM-HS-1FT View Product Page
Clear heat shrink tubing for covering soldered connections on indoor and outdoor LED strip lights and can also be used for wire management and wire harnesses. The non-waterproof type heat shrink will fit and shrink on 14mm, 12mm, 10mm, and 8mm strip lights. The waterproof type shrink tubing is marine grade with adhesive lining that can be used to add another layer of waterproofing to your outdoor LED strip lights that are installed in areas exposed to regular moisture and will work on our 12mm, 10mm. and 8mm waterproof strips.
Non Waterproof: 3/8 inch (10mm) 16mm Flat Width 2:1 Heat Shrink Tube Wire Wrap Clear.
Waterproof: 1/2 inch (13mm) 3:1 Waterproof Clear Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage.
Note: * Indicates a required field
- There are currently no reviews for this product