This digital RGB LED flexible strip light kit with DMX to digital SPI decoder is a one of a kind product. The SPI decoder works by interpreting a DMX512 signal and outputting each DMX RGB address to a 4" section of 3 LEDs. Each 5m roll of flexible digital RGB LED ribbon has 50 controllable 3 LED sections including a TM1803 type IC chip. This allows for roughly 17 meters of ribbon or 170 IC chips to be controlled by one DMX to digital decoder. Each decoder is sold as a kit including one DMX to digital decoder /driver, one 5m roll of digital RGB LED ribbon, 12mm wide (no quick connectors for this product) and one 40W / 12VDC wall plug style constant voltage power supply with one 5.5 x 2.1mm male jack to bare lead wire connector. Additional 5m rolls of ribbon may be purchased separately (additional 40W / 12VDC constant voltage power supply included). This product is perfect for the most demanding of lighting designers; allowing for a single strip of digital ribbon to be performing several different functions among several different sections on the same strip of ribbon simultaneously! Create color chasing, knight rider, and random pulsing effects using a DMX controller (sold separately) and customized programming. The DMX decoder has 16 built in functions with 16 speed levels. For customized programming a DMX controller is required to send a DMX signal to the SPI decoder.
|Click For Ribbon Data Sheet|
|Click For Decoder Data Sheet|
|Click For Connection Guide|
|RGB Strip Light Soldering Tutorial|
|Click For Demonstrational Video|
|Model||Digital RGB LED Ribbon Strip with DMX to Digital Decoder Kit|
|Dimensions||Ribbon: 197"L x 0.50"W x 0.16"H; Decoder: 6.89" x 1.73" x 1.18"H|
Power Supply: 4.5" x 2.0" x 1.25"H
|Constant Voltage DC Power||12VDC|
|Watts||Ribbon - 31W per 5M|
|Pixel Length||3.94" 3 LEDs|
|Pixel Amount||10 Pixels per Meter|
|Warranty Period||1 Year|
|Test Functions||16 Modes See Modes|
For B2B or Large Quantity Price Info Click Here
U10 WiFi DMX RDM Controller with Software and 5VDC Power Supply - 1024 Channel
SKU: LC-NL-DMX-U10 View Product Page
The all new U10 1024 Channel WiFi DMX and RDM Controller has built in WiFi compatibility to easily control and create custom LED lighting scenes and displays from a network device without the need for an Ethernet plug to a router or hub. Program your lights from user friendly software to build and save fine tuned lighting scenes. Use with our DMX decoders to control up to 341 RGB LED fixtures or 1024 single color LED fixtures. Use with RDM decoders and the RDM Manager software to set DMX addresses and settings remotely without the need of setting dip switches or addresses manually. Save up to 99 different lighting scenes and play them using the shuffle buttons on the controller. 8 dry contact trigger points can be used with relays to trigger scenes or use the external HE10 connector to trigger up to 255 scenes using binary coding. 100k memory will save up to 190 steps using 512 channels, 1550 steps using 60 channels, and 3935 steps using 20 channels. If you are looking for a DMX Controller with WiFi and smartphone control capabilities without the need of a fancy wall mount this is definitely the best and latest option in DMX control technology.
Signal Terminator for DMX Driver XLR3 Type
SKU: LA-EL-DMX-TM2 View Product Page
This is a DMX signal terminator for DMX Decoder / Drivers that use an XLR3 type connection for DMX Signal to LED Lights. This terminator will allow you to terminate the DMX signal in the last DMX driver of your system. For use with DMX systems using more than two XLR3 DMX drivers.
(3) 5.5 x 2.1mm Barrel Jacks with 12" Lead Wire
SKU: LA-SC-WJ-12-3 View Product Page
This 5.5 X 2.1mm barrel jack connector has 12" - 22AWG lead wire attached. Can be used for many projects to add a power supply connection point or mate with a 5.5 X 2.1mm plug connector. Sold in sets of 3. Please note this adapter is only rated for a maximum of 5A.
Heat Shrink Tubing - 1FT
SKU: OA-AM-HS-1FT View Product Page
Clear heat shrink tubing for covering soldered connections on indoor and outdoor LED strip lights and can also be used for wire management and wire harnesses. The non-waterproof type heat shrink will fit and shrink on 14mm, 12mm, 10mm, and 8mm strip lights. The waterproof type shrink tubing is marine grade with adhesive lining that can be used to add another layer of waterproofing to your outdoor LED strip lights that are installed in areas exposed to regular moisture and will work on our 12mm, 10mm. and 8mm waterproof strips.
Non Waterproof: 3/8 inch (10mm) 16mm Flat Width 2:1 Heat Shrink Tube Wire Wrap Clear.
Waterproof: 1/2 inch (13mm) 3:1 Waterproof Clear Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage.
Note: * Indicates a required field
- There are currently no reviews for this product