SKU: LN-DX-NSR-RGB-ECH
A 12" long 22AWG 4 wire solder lead with white PVC jacket and one holed end cap for re connection of RGB Side Emitting Neon Flex Strips. The wire lead must be soldered when cutting and re-connecting our RGB side emitting round neon flex strips. Silicone Adhesive is required to maintain IP67 waterproof level. Wires are cut shorter and pre-tinned on the end intended for soldering. All additional accessories are listed found below.
RGB LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)
SKU: LN-DX-NE-RGB-RH-5 View Product Page
Our newly added Side Emitting RGB Neon Flex has a special rounded top design that mimics traditional neon lighting without dangerous operating voltage or harmful chemicals. Each 16.4ft of neon flex is designed with a dual core milky silicone extrusion that is salt water resistant and won't yellow in the sun over time. The spherical design outputs 170° beam angle, side emitting which allows for bending on a horizontal axis. There is no need for a plastic cover or diffuser when using this product, create vibrant colors and color change functions without any visible dots or hot spots. This product is ideal for architectural accents, signs, displays, night clubs, storefronts, interior designs, or any application where a dot free color changing light is desired. Six 5050 LEDs per every 3.94" cuttable section produces 35 lumens per foot when all colors are on full brightness. Each 5 meter roll comes with 10 mounting clips, 10 self-tapping screws, 1 wire lead setup, and one end cap. You can cut this neon flex every 3.94" but you must be able to solder a wire lead to re-connect. A power draw of 3.51 watts of 24VDC power for each foot means the 16.4ft roll would need 58 watts minimum of 24VDC power and RGB color control to light on full brightness. This product is ETL listed, RoHS and CE approved.
Silicone End Cap for Rounded Side Emitting Neon Flex
SKU: LN-DX-NSR-EC View Product Page
A silicone end cap for sealing non wired ends of both our RGB and Single Color Side Emitting Neon Flex Strips. This end cap is intended only for the Round topped version of the flex strip. Silicone Adhesive is required to maintain IP67 waterproof level. All accessories can be found in products listed below.
RTV 4500 High Strength Silicone Sealant - 2.8oz Clear
SKU: OA-AM-SIL-GLU View Product Page
Use the RTV 4500 Silicone Sealant to adhere end caps and connectors to our waterproof silicone LED Strip Lights and Neon Flex Lights. RTV Silicone Sealant has excellent resistance to extreme temperature, moisture, ozone, vibration, and weathering. Product Specs: One-part acetoxy silicone rubber sealant Approved as a food grade silicone - NSF/ANSI Standard 51, USDA approved Will not crack or become brittle with age Application temperature -35 to 140° F.
Precision Micro Shears for Silicone Strip Housing and Small Wires
SKU: OA-AM-SIL-CUT View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicone housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
