(2) Stainless Steel Curved Mounting Rods for Tabletop Fixtures - 20"/ .5m

(2) Extrusion Mounting Fastener for Counter Top

SKU: EX-KL-MNT-2-2     View Product Page
A set of 2 counter top mounting fasteners for custom made LED counter top lamps. Use these fasteners with our Stainless Steel Mounting Rods (EX-KL-MNT-4-2), and either our .5" deep or round extrusions with conductive mounting post to create a modern counter top lamp on any surface with a thickness less than 1.5". Perfect for desks, kitchens, work areas, tool benches, or any other drillable surface. See the additional product photos for a layout of the finished lamp product using all of the necessary components. Note: These items conduct electricity and are not waterproof, shorting will occur if mounted to a metal surface.

Plastic End Cap with Post for PDS4 .5" Square Extrusion

SKU: EX-KL1-CAP-1P     View Product Page
This product is a plastic end cap for our .5" deep square shaped LED Aluminum Extrusions with a built in electrical conducting pole in order to create custom lamps and hanging fixtures with a clean and finished look. Simply solder your positive connection to one end and your negative connection to the other. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with other end caps if needed. With proper sealing techniques of your PDS4 extrusions with HS outdoor covers these caps can achieve an IP67 water-resistant rating and can be used in outdoor environments.

Plastic End Cap with Post for PDS-O Round Extrusion

SKU: EX-KL1-CAP-4P     View Product Page
This product is a plastic end cap for our .5" deep round shaped LED Aluminum Extrusions with a built in electrical conducting pole in order to create custom lamps and hanging fixtures with a clean and finished look. Simply solder your positive connection to one end and your negative connection to the other. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with other end caps if needed. With proper sealing technique and use of an HS outdoor cover these caps can achieve an IP67 water-resistant rating and can be used in outdoor environments.

IR Sensor Switch for LED Strip Light Channels, 12VDC 3A

SKU: LC-KL-SENS-1     View Product Page
Combine our LED strip lights and aluminum track assortments with this infrared on / off switch to create custom and functional LED light bars. The infrared technology allows you to wave your hand 1-4" from the sensor to turn your lights on and off as well as dimming control. To function properly the IR sensor must be open and exposed with no plastic cover over top. These sensors fit best with our slimmer KL1 style extrusions but can be used with our deeper extrusions by using a small mounting block for a base. You can either purchase the on/off switch or switch plus dimming capability. This 12 volt strip light controller can control up to 3 amps of 12V Strip light or 36 watts. Create your own custom lighting fixtures with simple on off and dimming control by a wave of the hand. Start making custom linear lighting fixtures for your home or business with control at your fingertips. Comes with 3M double sided VHB mounting tape for a permanent bond to your aluminum extrusion.

Touch Sensor Switch for LED Strip Light Channels, 12-24VDC 3A

SKU: LC-KL-SENS-2     View Product Page
Combine our LED strip lights and aluminum track assortments with this touch sensor on / off switch to create one of a kind touch activated light bars for any indoor lighting application. The touch spring allows you to touch the cover of your KLUS channel to turn your lights on and off as well as dimming control. This switch needs works best with our slimmer KL1 style extrusions and will need extra base height to work with our KL3 or deeper channels. You can either purchase just the on/off switch or switch plus dimming capability. This 12-24 volt strip light controller can control up to 3 amps of 12V or 24V Strip lights. Create your own custom lighting fixtures with simple on off and dimming control with just a touch of the hand. Start making custom linear lighting fixtures for your home or business with control at your fingertips.

Mean Well Waterproof LED Power Supply 20W - 12VDC

SKU: PS-MW-20-W-12     View Product Page
This UL recognized Mean Well 20 watt Constant Voltage LED Power Supply has an IP67 rating for wet or dry locations and is capable of supplying up to 1.67 amps of 12 volt DC power or 20.4 watts. A universal AC input of 100-240VAC makes this transformer useful in both home and industrial applications. Input and output connections are made using 18AWG bare wire leads. This small sized Class 2 LED Power Supply has built in short circuit, over load, and over voltage protection and adheres to UL safety standards. Use this small 12V LED transformer for indoor or outdoor 12VDC LED Lighting Projects.