The STICK3 DMX Controller is the latest and most powerful of the STICK family. Integrating a color display as well as compatibility with a variety of mobile apps and external triggering options, the STICK3 has been designed to accept the most challenging projects with ease. With 1024 DMX output channels and the ability to store 500 scenes across 10 zones, the STICK3 is one of the best value controller on the market. The newly designed touch sensitive interface features 10 buttons and a touch sensitive color wheel for fine tuning the color or speed of a scene. Built in Ethernet connectivity allows the unit to be programmed and controlled over a local network using your PC, MAC, iPhone, or Android device. Program the controller using the included USB cable and control software. You can even save images to be displayed on the screen for each scene being played. External triggering over WiFi includes RS232 for integration with an existing system, ethernet with open source protocol, infra red with easy learning using any 36Khz remote control, dry contact ports allowing you to add your own sensor or switch, and date/time including sunrise/sunset and daylight savings. This controller is compatible with any DMX fixture or DMX LED Driver. Connections include 3pin DMX, 2pin power, 2x10 pin extension socket, Ethernet socket, Power+DMX socket, and micro USB connection. Controller includes 6VDC Stand Alone power adapter, USB cable, Software Download, Micro SD Card with adapter, and wall mounting supplies.
|Model||STICK 3 DMX Controller|
|SKU - Black||LC-NL-STICK3-BLK|
|SKU - White||LC-NL-STICK3-WHT|
|Dimensions||5.75" x 4.17" x 0.43"H|
|DMX Output||RJ45 or Screw Terminal|
|Input Voltage||5VDC Micro USB|
6VDC Stand Alone
|Port Triggering||8 (255 in binary)|
|Warranty Period||1 Year|
DMX Signal Cable, RJ45 to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL1 View Product Page
This is a DMX signal Cable for an RJ45 type DMX output to an XLR3 Female type DMX input. This cord can be used to connect our U7, Stick 2+, and Stick 3 DMX controllers to any of our DMX drives with an XLR3 DMX input. This cable can also be used to connect an RJ45 output from our PX24500, PX24600, and PX403 drivers to an XLR3 DMX input. Custom cable lengths can be made for special orders, please call for pricing on custom lenghts.
24 Channel LED DMX Decoder, 5-24VDC 3A/CH
SKU: LC-EU-DMX-PX243 View Product Page
This DMX decoder allows for 24 Channels of LED lights to be controlled via a DMX control signal. With two DC power inputs, one for channels 1-12 and the other for 13-24, this LED decoder can control 12 channels of LED lights of similar or variating voltage inputs. This decoder accepts either XLR-3 type connections or bare wire connections for the DMX signal input and output. There are a total of eight, 3 channel, common anode outputs with screw-down terminal blocks for easy connection to your LED lights. This decoder is able to accept 5-24VDC at 3A per channel (twenty four channels total) for max load of 360W/5V, 864W/12V, or 1728W/24V. You can set the starting address of the DMX decoder via DIP switches located on the back of the unit. Please note that each DMX decoder requires 24 addresses in the DMX universe being used as well as a 5-24VDC driver large enough to power the lighting load. A built in LED light test mode is available with this DMX decoder. Systems with more than two DMX decoders being used require an XLR3 DMX terminator cable on the last DMX decoder in the series.
DMX Signal Amplifier, 8 DMX Signal Output 12/24VDC
SKU: LC-LN-DMX-AMP8 View Product Page
This product is an 8 output DMX signal amplifier and splitter. When running a DMX Signal cable in lengths over 1,000ft the signal can easily be distorted causing improper communication between the DMX Controller and the subsequent DMX Driver/Decoder. By using this DMX Signal Amplifiers the DMX signal can be extended up to an additional 500ft in eight different locations. Simply use an XLR3 type female plug for the DMX Signal Input and an XLR3 type male plug for the DMX Signal Outputs and any 500mA 12-24VDC Power Supply to power the unit and you will easily be able to extend and split your DMX Signal free of any signal distortion.