This customer project is one of a kind and created using nothing but our 24VDC Ribbon Star Flex RGB Strip, which can be bent and folded around corners, edges and curves. The color changing RGB lighting was tied into the existing DMX control system using our 12 Channel Flicker Free and PX24500 Decoders. The line voltage is transformed to 24VDC using our 320W 24V Mean Well Power Supplies. Take a look through the pictures to see how bright the strip light is and how vivid the colors are under and over the bar area as well as other seating and dance floor areas. The detail on the mountain edging was easy to do because the strip light can literally be bent and folded to meet any layout requirements. Overall this RGB lighting project turned out great and will sure to be remembered when visiting this establishment.
Mean Well LED Power Supply CV 350W - 24VDC
SKU: PS-MW-350-24 View Product Page
350W, 24VDC LED Power Supply / Transformer, 115VAC or 230VAC input and 24VDC output through three terminals. For dry locations only. Has screw down style connections. Comes with plastic covering to protect screw down terminals and two cooling fans to prevent high heat during operation. Note: The cooling fan runs noisy and may not be suitable for all applications. It can be used to connect LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 340 watts of 24VDC LED lights. Only install face up or in a manner that the cooling vents face upwards with sufficient breathing space.
PX24500 RGB LED DMX Decoder, 12-24VDC 5A/CH
SKU: LC-OL-DMX-PX View Product Page
The most popular DMX Decoder style PX24500, which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. 5A per channel with a maximum power of 180W / 12VDC or 360W / 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX24500 Driver uses 3 DMX addresses. RGB LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.
Flicker Free 1 to 12 Channel Adjustable LED DMX RDM Decoder, 12-24VDC 5A/CH
SKU: LC-SR-DMX12-FF View Product Page
Our UL Recognized adjustable flicker free 12 channel DMX LED decoder has three RGBW outputs to enable smooth control of three 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH output (12 single channels) or 12CH output (4 RGBW channels) and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 5 amps per channel allows you to control up to 720W (12VDC) or 1,440W (24VDC) per 12 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized, RoHS, and CE approved.