The UX5 wall mount LED Dimming system uses state of the art technology to create a complete dimming package that allows you to control 4 zones of low voltage single color LED lighting in a variety of ways. With the addition of the V5 remote you can control from the wall pad or using a hand held remote. Furthermore you can pair the UX5 to a WiFi-104 controller to control from a smartphone app, wall unit, or hand held remote. This is an ideal product for high end lighting projects that desire control from a variety of sources. In its simplest form you can pair an unlimited amount of RF receivers over 4 zones, or use a wired setup using single channel DMX decoders and the DMX output on the UX5 unit. Each wireless receiver can control 5 amps of lighting over 4 channels. This means that you can control 4 strings of 12V 60W LEDs or 4 strings of 24V 120W LEDs from each receiver. This product is indoor rated, RoHS and CE approved.
|Model||4 Zone Wall Mount Dimmer|
|V5 Remote SKU||LC-LT-SDIM-V5R|
|Dimensions||5.74"L x 4.17"W x 0.71"H|
|Input Connection||2 Wire (+/-)|
|Output Connection||3 Wire DMX(+)|
2.4GHz Wireless RF
|Control Mode||Single Channel, 4 Zones|
|Operating Temp||-22° ~ 131°F|
|Warranty Period||1 Year|
|Previous Mode on Power Cycle||Yes|
|Dimming Levels||255 Grey Scale|
|Model||Receiver for UX5 Controller and V5 Remote|
|Dimensions||6.89"L x 1.73"W x 1.18"H|
|Input Power||5 - 24VDC|
|Output Power||5A x 4CH|
|Maximum Watts||12VDC - 240W|
24VDC - 480W
|Operating Temp||-22° ~ 131°F|
|Warranty Period||1 Year|
|RF Receiver Radius||150ft (line of sight)|
|Zones||Unlimited Receivers, 4 Zones|
|Downloads & Info|
|Click For Product Data Sheet|
|Dimmer Connection Tutorial|
|Click For DIY Projects Ideas|
This product requires a Wireless Receiver or 1 Channel DMX Decoder to operate.
To operate using WiFi smart phone app a WiFi-104 Controller must be used.
4 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH
SKU: LC-LT-RGBW-WIFI View Product Page
The WiFi-104 is the latest of our Wifi LED Controllers, allowing the user to control RGB+W, RGB, two tone, and Single Color LED Strip Light all from your smart phone or tablet through the free 'WiFi-104' app. With this controller you do not have to switch from your home network to get back on the internet, but it still can be used remotely as it's own WiFi source. Each WiFi-104 can control up to 12 zones separately with unlimited receivers per zone using 2.4GHz Wi-Fi, 802.11b/g/n Protocol. This means you can control any type of 5-24VDC in twelve places throughout your WiFi area. 12 built in modes including DIY functionality, color wheel choices, as well as specific 0-255 brightness settings, this controller is one of the most versatile we've seen. Output ratings of 4A x 4 channels allow this controller can handle up to 48W per channel at 12VDC or 96W per channel at 24VDC. Each additional wireless zone receiver can handle 5A x 4 channels or 60W per channel and 240W when all channels are being used, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes and pairing the wireless 12 zone receivers. This product is CE and RoHS approved.
Flicker Free Single Channel LED DMX Decoder, 12-24VDC 25A/CH
SKU: LC-HO-DMX1-FF View Product Page
Our flicker free single channel DMX LED driver is the top choice for lighting professionals who require smooth dimming effects with no apparent flicker or choppy dimming levels. The high PWM frequency of 7.8KHz allows for 0-255 fluid dimming steps with no visible distortion, perfect for HD filming. Simple screw down connectors make it easy to install your 12-24VDC input, LED output, as well as DMX connection using a small screw driver. Each decoder has a set of 10 dip switches for setting your DMX address and also for test functions when no DMX signal is present. An impressive 25 amps output by one channel allows you to control up to 300W of 12VDC single color LED lighting or 600W of 24VDC monochrome LED Lighting. This product is intended only for use with 12-24VDC common anode style single color LED Lighting. DMX input and outputs require a bare wire connection and can be connected to a DMX512 signal using 3 bare wires, DMX+ / DMX- / Ground. This product is RoHS and CE approved.
2.7" Round Slim LED Puck Light Daylight White - 3W, 12VDC
SKU: LD-LF-25R1-DW View Product Page
Our slim 12V PWM dimmable LED Puck Lights are an easy to use and aesthetically pleasing light fixture for cabinets, displays, shelves and more. Each light simply needs a cut hole of 2.36" Diameter (60mm) and minimal surface thickness to mount the 0.55" tall fixture. Consuming only 3 watts of 12VDC power per light, these are a low cost and economical indoor lighting solution. Constructed of 15 pieces of 2835 size SMD LEDs, a white aluminum housing with a frosted plastic cover that blends the lights for a nice diffusion. A 7.5" wire lead comes off the backside of the fixture for connection to a 12V power source or PWM dimmer. The daylight white output is in the 4000-4500 kelvin range with 220 lumens per fixture. Each light is CE, RoHS approved and has a 50,000 hour lifetime span.
2.7" Round Slim LED Puck Light Warm White - 3W, 12VDC
SKU: LD-LF-25R1-WW View Product Page
Our slim 12V PWM dimmable LED Puck Lights are an easy to use and aesthetically pleasing light fixture for cabinets, displays, shelves and more. Each light simply needs a cut hole of 2.36" Diameter (60mm) and minimal surface thickness to mount the 0.55" tall fixture. Consuming only 3 watts of 12VDC power per light, these are a low cost and economical indoor lighting solution. Constructed of 15 pieces of 2835 size SMD LEDs, a white aluminum housing with a frosted plastic cover that blends the lights for a nice diffusion. A 7.5" wire lead comes off the backside of the fixture for connection to a 12V power source or PWM dimmer. The warm white output is in the 2700-3500 kelvin range with 200 lumens per fixture. Each light is CE, RoHS approved and has a 50,000 hour lifetime span.
Note: * Indicates a required field
- There are currently no reviews for this product