To complete this kitchen lighting project our customer used 4 rolls of our 12VDC Ribbon Star Max Warm White LED Strip Lights to provide soft, bright, and inviting illumination to his kitchen cabinets. The installation was fairly straight forward and simple to install. Wall power was converted from high voltage AC to 12VDC using our Mean Well 200W 12VDC Power Supply, two sets of DC output power wires were then wired from the power supply to the PWM Dimmer and also the signal amplifier. Since the 12VDC Wall Outlet Mount LED Dimmer can only power 5 amps of lighting, or 60 watts, a Single Channel Signal Amplifier was used to dim the additional load of strip lighting. The lighting didn't take long to install and instantly transformed the ambience of the kitchen space. If you are interested in completing a similar project for yourself, give us a call and we would be happy to assist you.
Ribbon Star Max Warm White LED Strip Light, 3000-3500K, UL 12VDC - IP20
SKU: RL-SC-RSM-WW-3M View Product Page
The UL Listed Ribbon Star Max LED Ribbon is a perfect solution for backlight and ambient light applications. This 118" (3 meters, approximately 10 Feet) ribbon can be cut every one inch and has many quick connection options for easy connection. Ribbon comes with 3M™ 200MP mounting tape on the back, for the best long-term mounting solution. Six (6) SMD LEDs per two inches, 2.92W per foot of power required for this strip of light. Can be used for coves lighting, toe kicks, under cabinet, backlighting, crown molding and many more applications. Requires a 12VDC Constant Voltage power supply, 3500K color temperature. Comes with two quick connectors. UL Listed for class 2 luminaries and fixtures, RoHS and CE approved.
Mean Well LED Power Supply Three Output 200W - 12VDC
SKU: PS-MW-200-12 View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
1 Channel Signal Amplifier / Repeater, 12-24VDC 10A
SKU: LC-LT-1AMP View Product Page
A single color signal amplifier / repeater for extending a PWM Dimming signal to additional single color LED Lights. Use this signal amplifier for larger LED light installations where you would like to dim a large amount of LED lights off of a single dimming signal. Once you have met the power limitations of your PWM dimmer you can use this amplifier to dim an additional 10A of lights, or 120W at 12VDC / 240W at 24VDC. Simple to use screw down terminals make for an easy and secure connection, see the installation guide below for wiring instructions.