SKU: LC-HK-DMX-WI
This product is a wireless DMX Transmitter and Receiver designed to send and receive a DMX control signal wirelessly up to 1,000ft (line of sight). A minimum of two units are needed to operate, one is required to send the DMX signal (transmitter) and an unlimited amount of receivers can be paired to the transmitter within the wireless range. Sixteen group options allow for 16 different DMX signals to be wirelessly transmitted in one area. The wireless 2.4Ghz RF signal uses 126 channels decreasing interference and allowing reliable communication. Each unit has a XLR 3 type male/female connectors for the DMX input and output, a DMX decoder, or DMX fixture with built in driver, is then required to set the DMX address and operate your lighting. Each unit includes a 9VDC power adapter, a minimum of 2 units is required to send and receive a DMX signal.
SPECIFICATIONS | |
Model | Wireless DMX Transmitter / Receiver |
SKU | LC-HK-DMX-WI |
Dimensions | 2.95"L x 5.78"W x 1.69"H |
Input Connection | 5.5 X 2.1mm Barrel |
Output Connection | XLR 3(DMX+/-/G) |
Input Power | 9-12VDC 300MA MIN |
Output Signal | DMX512 |
Working Frequency | 2.4 GHz ISM, 126 Channels |
Maximum Transmitted Power | 20dBm |
Max Control Radius | 1,000ft (line of sight) |
Rating | Indoor |
Operating Temp | -4° ~ 113°F |
Warranty Period | 1 Year |
A minimum of 2 units are required to send and receive a DMX signal.
DMX Signal Cable, XLR3 Male to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL6 View Product Page
This is a DMX signal Cable with a XLR3 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller or device that has XLR3 output plugs to our PX24501 or 24 Channel DMX Drivers, or to daisy chain any other DMX LED Drivers with XLR3 connectors.
Flicker Free 1 to 5 Channel Adjustable LED DMX RDM Decoder, 12-24VDC 8A/CH
SKU: LC-SR-DMX5-FF View Product Page
Our UL Recognized flicker free 1 to 5 channel DMX LED decoder is the top choice for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH output (5 single channels) or 5CH output (RGBW+WW) and set your starting DMX address. XLR5, RJ45 or simple screw down connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 8 amps per channel allows you to control up to 96W (12VDC) or 192W (24VDC) per 5 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized RoHS and CE approved.
Flicker Free 1 to 12 Channel Adjustable LED DMX RDM Decoder, 12-24VDC 5A/CH
SKU: LC-SR-DMX12-FF View Product Page
Our UL Recognized adjustable flicker free 12 channel DMX LED decoder has three RGBW outputs to enable smooth control of three 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH output (12 single channels) or 12CH output (4 RGBW channels) and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 5 amps per channel allows you to control up to 720W (12VDC) or 1,440W (24VDC) per 12 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized, RoHS, and CE approved.
Flicker Free 1 to 24 Channel Adjustable LED DMX RDM Decoder, UL 12-24VDC 4A/CH
SKU: LC-SR-DMX24-FF View Product Page
Our UL Recognized flicker free 24 channel adjustable DMX/RDM LED decoder has six RGBW outputs to enable smooth control of six 12-24VDC 4 Color LED Lights or fixtures using a DMX control signal. Built in adjustable PWM dimming control ranging from 500Hz - 30kHz makes this is the ideal DMX decoder for lighting and video professionals who require smooth fading and color changing effects with no flicker or noticeable steps. The PWM output frequency can be set from 500HZ ~ 30K HZ with an 8bit or 16bit resolution, and a dimming curve gamma value from 0.1~9.9 allowing for fluid dimming and color control functions. Using the analog display choose from 1CH (24 single channels) or 24CH (6 RGBW channels) output and set your starting DMX address. XLR5 or RJ45 connectors give you plenty of options to input and output your DMX signal. Small screw down connectors are used for your DC input and output. An impressive 4 amps per channel allows you to control up to 1,152W (12VDC) or 2,304W (24VDC) per 24 channels. This product is intended only for use with 12-24VDC common anode style RGBW, RGB, or single color LED lighting. A 12-24VDC low voltage driver is required to power this unit and must be large enough to power the load of the light output. This product is UL Recognized, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product