A small sized water-resistant DMX Driver which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to a DMX-512 Lighting controller. Then by the use of PWM and DMX, you can change the color and dimming of your RGB LED lights. This product is not submersible. For 12 or 24VDC systems only. 4A per channel with a maximum power of 144W at 12VDC or 288W at 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. All wires are bare and need to be connected using a connector or wire nuts. NOTE: To change the DMX address of these modules you need to buy the DMX Editor Controller or have us set the address for each module you buy. Each DMX Driver uses 3 DMX addresses.
|DMX-512 Driver RGB LED
|3.75" X 2.06" X 1.25"T
|4 Pin, 3 Loop, Common Anode
|Constant Voltage DC Power
|12/24VDC 4A per Channel Max
|144W Max -12VDC
288W Max -24VDC
|Yes See Mode
U9 DMX Lighting Controller with Software and 5VDC Power Supply - 256 Channel
SKU: LC-NL-DMX-U9 View Product Page
The U9 256 Channel DMX Controller uses the Easy Stand Alone (PC) or Easy Stand Alone 2 (PC/MAC) computer software to build and save unique and precise lighting scenes for use away from the computer. Use with our DMX decoders to control up to 85 RGB LED fixtures or 256 single color LED fixtures. Save up to 20 different lighting scenes and play them using the shuffle buttons on the controller. 8 dry contact trigger points can be used with relays to trigger scenes or use the external HE10 connector to trigger up to 255 scenes using binary coding. This system can be run live from the computer via the included software allowing for a full DMX universe of 512 channels. 20k memory allows for 439 steps using 60 channels, and 1184 steps using 20 channels. If you are looking for a powerful and affordable DMX controller or you are just starting out learning about DMX control, this is a great controller for you. The U9 is not limited to only LED control but also can be used for moving heads, fog machines, water jets, fans, or any other DMX compatible device. 5VDC AC/DC converter, and USB to mini USB Cable included.
Note: * Indicates a required field
- There are currently no reviews for this product