SKU: WW-LG-RGBW-F1XL
The extra large RGBW Flood lights has a total of (30) 4 in 1 Epistar LEDs to output millions of color choices along with cool white output. Constructed of Aluminum housing with a tempered glass front this waterproof light has an IP65 rating, non submersible, suitable for most outdoor areas. A 24VDC rated RGBW Controller is needed to create color changing effects as well as dim and switch the white output. Each fixture requires a separate 24VDC Constant Voltage power input with a minimum of 240 watts. These floods are ideal for illuminating buildings, walls, landscaping, architecture, sculptures, displays and signs. With full dimming control of each color channel this fixture can output over 4 billion shades of color and can also be incorporated with other RGBW lighting products or DMX control systems. These lights can be operated by RGBW or DMX controllers using a 5-pin, 4-loop common anode connection. One 5 wire connector to bare lead is included with each light. This product is non-submersible and will get longest life when installed in an area protected from constant water and sun exposure.
| Click For Product Data Sheet |
| RGBW Flood Connection Guide |
| Click For Electrical Load Calculator |
| SPECIFICATIONS | |
| Model | Bright Star 4 in 1 RGB LED Flood - 240W 24V |
| SKU | WW-LG-RGBW-F1XL |
| Dimensions | 11.22" x 9.25" x 6.30"H |
| Connection Type | 5 Wire RGBW(+) |
| Input Power | 24VDC |
| Watts | 240 watts |
| Beam Angle | 60° |
| Lumens | R:2100lm G:3300lm B:1200lm W:4500lm |
| Rating | IP65 |
| Operating Temp | -40°~113°F |
| Projecting Distance | Up to 100ft |
| Max Serial Connection | Unlimited |
| Warranty Period | 2 Year |
RGBW Flood Light Water-Resistant 5 Wire Connection Cable - 80"
SKU: LA-LG-RGBW-1CON View Product Page
A waterproof connector with 5 conductor 18AWG stranded wire that can be used to connect our RGBW LED flood lights to each other, to a controller or signal amplifier, or for quick and easy connection of any RGBW LED product. 80" long with screw down connections, male on one end and a female on the other end.
Mini Pro RGBW RF Remote & Receiver Kit, 5-24VDC 5A/CH
SKU: LC-LT-MRGBW2-KIT View Product Page
From our series of Mini Controllers comes a new Pro RGBW controller for 5-24VDC constant voltage RGBW & RGBWW led lighting products. Each remote is paired by the user to any number of mini receivers to create wonderful color changing effects along with RGBW dimming control (5-100%) in a variety of indoor lighting applications. Each mini receiver has a 5-24VDC input with a max output rating of 5A x 4 channels or max load of 240W at 12VDC or 480W at 24VDC. Choose from 6 built in modes with brightness and speed adjustment, 6 pre-programmed static colors with dimming adjustment, or create and save up to 7 custom static colors using the RGBW 5-100% dimming control. Previous scenes and dimming levels are stored when 5-24VDC input is powered on/off. The single color LED output is dimmed and controlled independently from the static RGB colors and RGB color changing modes. Remotes and receivers are sold together as part of a kit or can be purchased separately, please choose the controller option you would like from the drop down list.
Mean Well Waterproof LED Power Supply 240W - 24VDC
SKU: PS-MW-240-W-24 View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.
5 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-5C View Product Page
This is a 5 conductor 18AWG encased outdoor and waterproof wire, made for use with our RGB Extreme Strip Light and RGB + White Strip lights. This wire can also be used for any other indoor or outdoor low voltage LED lighting projects. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an Control signal to as many fixtures as your junction box will allow. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
