This is a DMX signal Cable with a XLR5 male plug on one end and RJ45 jack on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller that has XLR5 output plugs to our PX24501, PX24600, PX403, PX24500 DMX Drivers, or any other DMX LED Driver with RJ45 connection.
For B2B or Large Quantity Price Info Click Here
PX24501 RGB LED DMX Driver XLR3 & RJ45, 12-24VDC 5A/CH
SKU: LC-OL-DMX-PX01 View Product Page
This DMX512 driver allows for LED lights to be controlled via a DMX controller by accepting both DC supply voltage and your DMX controller signal and distributing it to attached LED lights. This driver accepts XLR-3 type connections or RJ45 connections for the DMX signal input and output and has a screw-down terminal block for DC input power and 4-wire common anode output to your LED lights. This driver is able to accept 6-24VDC at 5A per channel (three channels total). You can set the starting address of the DMX driver via DIP switches located on the back of the unit. Please note that each DMX driver requires 3 addresses in the DMX universe being used. One cat5 Ethernet cable included with each driver for daisy chaining multiple drivers. LED light test mode available with DMX driver. Systems with more than two DMX drivers being used require an XLR3 or RJ45 DMX terminator cable on the last DMX driver in the series.
PX24606 Single Channel DMX Driver / 0-10V Dimmer, 12-24VDC 3A
SKU: LC-OL-DMX-PX6 View Product Page
The PX24606 is a single channel DMX driver that can be controlled by a DMX control system or can be connected to a switch or automated home system using a 0-10V Analog control, such as Lutron, Crestron, or Control 4. One light or strip of single color lights can be dimmed using this product. Intended for use only with 12 to 24VDC constant voltage LED lighting products. 3A per channel with a maximum power of 36W/12VDC or 72W/24VDC. Can be connected to DMX512 signal using 3 bare wire connections. Unit has DIP switches on the side to manually change the DMX address of each driver. LEDs and power supply are connected using screw down style connectors. Each of these Drivers use 1 DMX address and can be daisy chained in any DMX universe. RoHs, CE certified.
PX403 4 Channel LED DMX Driver, 12-24VDC 3A/CH
SKU: LC-OL-DMX-PX02 View Product Page
The PX403 4 channel DMX driver allows you to connect four channels of LED Lighting to DMX512 or DMX1990 Lighting controllers. Use this product to connect your common anode RGB LED lights plus one single color common anode LED light, or four common anode single color LED lights, LED modules, or LED light strips to a DMX512 Control System. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors. 3A per channel with a maximum power of 144W / 12VDC or 288W / 24VDC. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX403 Driver uses 4 DMX addresses. LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.
PX24500 RGB LED DMX Driver, 12-24VDC 5A/CH
SKU: LC-OL-DMX-PX View Product Page
The most popular DMX Driver style PX24500, which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors. 5A per channel with a maximum power of 180W / 12VDC or 360W / 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX24500 Driver uses 3 DMX addresses. RGB LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.