SKU: RA-LU-RGBC-10RW-5
Use these 10mm RGB LED Strip light snap connectors with your own custom wire lengths to create 10mm wide strip light connectors for any of our non-waterproof Ribbon Star 10mm wide 4 wire RGB LED Strip Lights listed below. These connectors are designed to easily connect 18-22AWG stranded wire to your color changing strip lights. To connect simply pull back the tab, insert your strip, insert your wire, and snap the tab back into place. This product is not waterproof and intended only for use with our indoor LED strip lights. A small relief for the LED chip allows this connector to be used with a more dense strip light. Please note: This product works best with soldered wire leads using 18-22AWG stranded wire.
Compatible Strip Lights | |
12V RGB 90 | RL-SC-RS-RGB2-10 |
12V RGB 180 | RL-SC-RS-RGB1-10 |
12V RGB 180B | RL-SC-RS-RGB1B-10 |
24V RGB 180 | RL-SC-RS-RGB24-10 |
24V RGB Lux | RL-DX-RLX-RGB-10 |
Note: * Indicates a required field
Save your money
My purpose in using these was to save time at the installation site. I did not save time, I wasted time. Used these with the rl-dx-rlx-rgb-10 string of LEDs. LED side worked as advertised. The wire side did not. Intermittent connection using bare wire. Wires would either not fit, or would not lock in to the connector socket when I tinned them. So I soldered the wires direct. Not the first time I have had the same results with similar products. Your mileage may vary, but tinning the wires means I have my soldering iron out already, I may as well solder the wire to the light string.
Jan 23, 2022 | Adcolor