Frequency Adjustable LED Dimmer with Key Fob RF Remote, 12-24V 30A

SKU: LC-LF-1DIM     View Product Page
Our small sized flicker free LED dimmer uses a uniquely paired key fob RF remote to dim and control your 12-24VDC constant voltage LED lights and dip switches to adjust the PWM frequency and dimming curve. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories, when set to higher PWM frequencies the maximum load decreases. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. Choose from 5-100% range of dimming levels using two simple arrow buttons on the remote. Our key fob led dimmer can be used to dim LED strip lights, LED modules, LED wall washers, or for dimming any one color common anode 12VDC or 24VDC LED products. Each RF Remote requires (2) 3V / CR2016 type batteries (included) and is paired with a unique RF frequency to prevent command crossover when using multiple units.

Flicker Free LED Knob Dimmer, Frequency Adjustable, 12-24VDC 30A

SKU: LC-LF-2DIM     View Product Page
The frequency adjustable LED Light Dimmer uses a knob to dim your 12-24VDC constant voltage LED lighting products from 0-100% and dip switches to change the PWM frequency for flicker free applications. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories, when set to higher PWM frequencies the maximum load decreases. DC input and output wires can easily be secured using the screw down connectors. The small size of this PWM dimmer makes it easy to conceal and set the lights to the brightness level you prefer. Use this dimmer for LED strip lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.

1 Channel Signal Amplifier / Repeater, 12-24VDC 10A

SKU: LC-LT-1AMP     View Product Page
A single color signal amplifier / repeater for extending a PWM Dimming signal to additional single color LED Lights. Use this signal amplifier for larger LED light installations where you would like to dim a large amount of LED lights off of a single dimming signal. Once you have met the power limitations of your PWM dimmer you can use this amplifier to dim an additional 10A of lights, or 120W at 12VDC / 240W at 24VDC. Simple to use screw down terminals make for an easy and secure connection, see the installation guide below for wiring instructions.