This Product Has been Discontinued
This product has been discontinued or is no longer available from the manufacturer, we apologize for any inconvenience. Please browse our similar replacement products found below.
PX408 4 Channel LED DMX RDM Decoder, 12-24VDC 8A/CH
SKU: LC-OL-DMX-PX02 View Product Page
The PX408 4 channel DMX decoder allows you to control 32 amps over four channels of LED Lighting to DMX512 1990 or RDM 2009 Lighting controllers. Use this for any 12-24VDC common anode RGBW lights, RGB LED lights plus one single color LED light, or four single color LED lights, LED modules, or LED light strips to a DMX or RDM 2009 Control System. 8A per channel with a maximum power of 384W / 12VDC or 768W / 24VDC. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables or by using the green phoenix terminals for your 3 wire dmx signal. Unit has DIP switches on the side to manually set the starting DMX address of each driver. On power lights will be white until a DMX signal is received, test function will cycle colors when all dip switches are in the on position. Supported RDM parameters: DISC_UNIQUE_BRANCH / DISC_MUTE / DISC_UN_MUTE / DEVICE_INFO / SOFTWARE_VERSION_LABEL / DMX512/ RDM_START_ADDRESS / IDENTIFY_DEVICE / MANUFACTURER_LABEL / SUPPORTED_PARAMETERS. LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.
PX24500 RGB LED DMX Decoder, 12-24VDC 5A/CH
SKU: LC-OL-DMX-PX View Product Page
The most popular DMX Decoder style PX24500, which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. 5A per channel with a maximum power of 180W / 12VDC or 360W / 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX24500 Driver uses 3 DMX addresses. RGB LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.