Use this 3" long cable on the external HE10 connector of our U7 and U9 DMX controllers to activate up to 255 scenes using relays and binary coding. To activate a port, a brief contact of at least 1/25 second must be established between the ports (1...8) and the ground (GND). Note: the scene will not be switched off when the switch is released. In your ESA, ESA2 or ESA PRO software set the scene trigger using binary data and up to 255 scene selections.
(10) 1 Wire Solderless Snap Down Butt Connectors, 18-24AWG
SKU: LA-LU-WC-1WB-10 View Product Page
Our solderless single pole snap down butt connectors are designed to easily connect two pieces of 18-24AWG stranded wire together without soldering or wire stripping. Each end of the connector has built in conductive metal blades to perforate and secure your 18-24AWG stranded wire, so no wire strippers are required. Simply insert your wire through the intended wire hole and press down with a pair of pliers. Unlike standard crimping style butt connectors, these connectors can easily be re-used multiple times over. Each connector is rated for a max voltage of 300V AC/DC not to exceed 10 amps. These connectors are sold in sets of 10 and can be used with our T and snap connectors for various wiring circuits.
2 Conductor DC Connection Wire Red/Black Pair - 22AWG
SKU: LA-SS-DC22 View Product Page
This is a 22 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.
U7 DMX Lighting Controller with Software and 5VDC Power Supply - 1024 Channel
SKU: LC-NL-DMX-U7 View Product Page
Our affordable 1024 Channel U7 DMX Controller comes with PC Software to easily program custom lighting scenes and control your LED Lights and DMX devices away from your computer. Save up to 250 scenes over 5 zones to the U7's 512MB mini SD card. Control up to 341 RGB fixtures or 1024 single color fixtures in stand alone mode, or when connected live to the computer control up to 512 RGB fixtures or 1536 single color fixtures. A built in Ethernet connection allows you to connect your U7 to a home or business network for network control, editing, and smartphone & tablet control. For large installations use multiple units over the network to have control over an unlimited amount of DMX channels. Clock and calender triggering functions are included for triggering of scenes at specific dates and times. The U7 is not limited to only LED control but also can be used for moving heads, fog machines, water jets, fans, or any other DMX compatible device. This really is one of our most powerful and affordable DMX controllers. Software Disk, 5VDC AC/DC converter, and USB to mini USB Cable included.
U9 DMX Lighting Controller with Software and 5VDC Power Supply - 256 Channel
SKU: LC-NL-DMX-U9 View Product Page
The U9 256 Channel DMX Controller uses the Easy Stand Alone (PC) or Easy Stand Alone 2 (PC/MAC) computer software to build and save unique and precise lighting scenes for use away from the computer. Use with our DMX decoders to control up to 85 RGB LED fixtures or 256 single color LED fixtures. Save up to 20 different lighting scenes and play them using the shuffle buttons on the controller. 8 dry contact trigger points can be used with relays to trigger scenes or use the external HE10 connector to trigger up to 255 scenes using binary coding. This system can be run live from the computer via the included software allowing for a full DMX universe of 512 channels. 20k memory allows for 439 steps using 60 channels, and 1184 steps using 20 channels. If you are looking for a powerful and affordable DMX controller or you are just starting out learning about DMX control, this is a great controller for you. The U9 is not limited to only LED control but also can be used for moving heads, fog machines, water jets, fans, or any other DMX compatible device. Software Disk, 5VDC AC/DC converter, and USB to mini USB Cable included.
Note: * Indicates a required field
- There are currently no reviews for this product