SKU: OL-ON-D7
Our milky frosted polycarbonate deck lights are designed to create illumination throughout the entire fixture, giving a slightly different reveal than our stainless steel fixtures. Each fixture is IP67 waterproof rated for outdoor and indoor use (not designed to be submersed). The metal clips make installation easy on a variety of different surfaces with a 1.18" (30mm) hole. The 1.5" frosted LED Recessed light is available in white, warm white, and RGB color changing tones, perfect for deck lighting, outdoor stair case lighting, pathways, hand rails, toe kicks, landscape accents, in ground use, or any other lighting application requiring a small, low profile, and durable color controllable light. The white and warm white fixtures require only 1W of power and the RGB requires 0.6W of power per light using 12VDC only. This product is a low energy, long lasting solution that will give any outdoor or indoor space an amazing color accent. A great solution for your home or business. Emits no UV or IR, CE and RoHS approved. For use only with compatible 12VDC Constant Voltage power supplies and 12VDC common anode controllers.
| Click For Product Data Sheet |
| Click For Wire Connector Video |
| Calculate Electrical Load | |
| * Power Supply capacity must be larger than minimum lighting load. | |
| SPECIFICATIONS | |
| Model | 1.5" LED Recessed Light - Frosted |
| White SKU | OL-ON-D7-W |
| Warm SKU | OL-ON-D7-WW |
| RGB SKU | OL-ON-D7-RGB |
| Dimensions | 1.57" Diameter x 1.25" Depth |
| Beam Angle | 120° |
| Lifespan | 40,000 Hours |
| Power | 12VDC |
| Watts | White/Warm: 1.0 Watts RGB: 0.6 Watts |
| Rating | IP67 |
| Warranty Period | 1 Years |
1.50" LED Recessed Light Clip Mount - 12VDC, IP67 Frosted Face
1.50" LED Recessed Light Clip Mount - 12VDC, IP67 Frosted Face
1.50" LED Recessed Light Clip Mount - 12VDC, IP67 Frosted Face
1.50" LED Recessed Light Clip Mount - 12VDC, IP67 Frosted Face
For B2B or Large Quantity Price Info Click Here
(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG
SKU: OA-AM-HS-22-10 View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 18-22AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.
2 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-2C View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
2 Conductor Direct Burial Wire - 18AWG
SKU: OA-AX-2C View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.
4 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-4C View Product Page
This is a 4 conductor 18AWG encased outdoor and waterproof wire, made for use with our stainless steel IP68 junction boxes or any other indoor or outdoor LED lighting project. Use this wire with our underwater and outdoor RGB LED fixtures, Strip Lights, Modules, or any other low voltage DC system. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an RGB Control signal to as many fixtures as your junction box will allow. This wire is also a great option for any indoor or outdoor RGB LED projects requiring a 4 conductor encased wire. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
4 Conductor Direct Burial Wire - 18AWG
SKU: OA-AX-4C View Product Page
This is an 18AWG, 4 conductor stranded copper wire designed for RGB 4 wire lights or can also be used for parallel connecting of single color LEDs. This wire is direct burial but is also suitable for any indoor or outdoor wiring for voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
